Abstract:Freezing-thawing (F-T) cycle is one of the main reason of concrete damage in cold regions. F-T cycle mainly lead to degradation of macroscopic mechanical properties of concrete by changing the number of micropores, mesopores and macropores, and causing severely damage to its internal texture. The variations of the physical and mechanical properties of concrete sample with different inclination angle of internal flaw exposed to different F-T cycles (0, 10, 30 and 50 cycles) under unconfined compression condition was deeply investigated based on the acoustic emission (AE) and nuclear magnetic resonance (NMR) technology. The evolution of the internal cracks are tracked in real-time by AE monitoring systems during the entire test process. Meanwhile, the micro-structure of the concrete sample after F-T cycle treatment is microscopically observed with T2 distribution by low-field nuclear magnetic resonance. The results show that the peak strength of concrete decreases with the increasing F-T cycles and increases as the increasing inclination angle of prefabricated flaw. The elastic modulus decreased gradually with the increase of F-T cycles. The elastic modulus of the sample without F-T cycles treatment increases with the increase of inclination angle of prefabricated flaw. As the flaw inclination angle increases from 0° to 90°, the F-T cycles increases from 0 to 50, the peak strain shows an obvious discreteness without monotone change. When the number of F-T cycle reaches 50, concrete blocks fall off from the sample surface. A continuum damage model considering F-T damage from different pore size is finally introduced to describe the damage evolution of concrete during compression test. The research results can be used to quantitatively evaluate the strength of concrete samples treated by F-T cycle without mechanical tests.

Evolution Model of Concrete Failure Surface under the Action of Load and Frezee-Thaw Cycles

EVOLUTION MODEL OF CONCRETE FAILURE SURFACE UNDER FREEZE-THAW CONDITIONS

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Deterioration characteristics of the bond between reinforcement and concrete subjected to freezing-thawing cycles and steel corrosion

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Concrete Failure Criterion under Freeze-Thaw Condition in Structural Engineering

Study on Mechanical Properties of Deep Expansive Soil and Coupling Damage Model of Freeze–Thaw Action and Loading

A stochastic damage model for evaluating the internal deterioration of concrete due to freeze–thaw action

Model of Compressive Strength Degradation of Concrete under Both Freeze-Thaw Cycles and Compressive Loads

Study on Freezing-Thawing damage mechanism and evolution model of concrete

Flexural behaviour of reinforced concrete members subjected to freeze-thaw cycles

Damage Evolution and Plasticity Development of Concrete Materials Subjected to Freeze-Thaw During the Load Process

Microstructural Damage Evolution And Its Effect On Fracture Behavior Of Concrete Subjected To Freeze-Thaw Cycles

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Research progress on freeze–thaw constitutive model of concrete based on damage mechanics

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Cohesive Fracture and Probabilistic Damage Analysis of Freezing–thawing Degradation of Concrete

Probabilistic damage modeling and service-life prediction of concrete under freeze–thaw action

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Flexural Behaviour of Reinforced Concrete Beams under Freeze–thaw Cycles and Sustained Load