Abstract:Oceanic cobalt‐rich crusts contain many valuable metals including Co, Ni, Cu, and Mn, of which Co and Ni are scarce metal resources on terrestrial land. Co, Ni, Cu, and Mn in cobalt‐rich crusts can be efficiently extracted by the ammonium sulfate roasting‐water leaching (ARWL) process, but separating and recovering Co and Ni from the leaching solution containing high concentrations of Mn is a challenging problem. In this study, a combination of sulfide precipitation and P507–Cyanex 272 synergistic extraction is proposed for the separation and recovery of Co and Ni from the ARWL solutions of oceanic cobalt‐rich crusts. Under the optimum sulfide precipitation conditions, Co and Ni were precipitated with 99.85% and 99.63% efficiency, respectively, while Mn was coprecipitated with only .79% efficiency. The Co–Ni mixed sulfides were dissolved by dilute sulfuric acid under oxidative conditions to obtain a solution containing 12.584 g/L Co, 11.012 g/L Ni, and a small amount of Mn. Subsequently, Co and Mn were extracted from this solution using P507–Cyanex 272 synergistic extraction, the single‐stage extraction efficiencies of Co and Mn were 95.76% and 99.73%, respectively, and the coextraction efficiency of Ni was 3.02%, under the conditions of a feed solution pH of 3.0, an extractant saponification degree of 70%, a total extractant concentration of 20% (P507 to Cyanex 272 ratio of 3:7), and an O/A ratio of 1.1:1. The results of the thermodynamic study showed that the reaction of Co extraction by this mixed extraction system was exothermic. Ni in the organic phase was washed with an H2SO4 concentration of .12 mol/L, followed by stripping of Co and Mn with an H2SO4 concentration of .6 mol/L. Mn in the stripping solution was removed by oxidative precipitation with (NH4)2S2O8, after which the Co3O4 product was obtained by precipitation with (NH4)2C2O4 and calcination. Similarly, NiC2O4·2H2O can be obtained from the raffinate by (NH4)2C2O4 precipitation. Finally, a flowsheet was developed for the separation and recovery of Co, Ni, Cu, and Mn from the ARWL solutions of oceanic cobalt‐rich crusts. The study provides a promising scheme for the recovery of various valuable metals from deep‐sea cobalt‐rich crusts or manganese nodules.

Separation of Cobalt and Nickel from Wastewater by P-204 Microemulsion Saponified

Superhydrophilic/underwater Superoleophobic Oil-in-water Emulsion Separation Membrane Modified by the Co-Deposition of Polydopamine and Chitosan-Tripolyphosphate Nanoparticles

Separation of cobalt and nickel via solvent extraction with Cyanex-272: Batch experiments and comparison of mixer-settlers and an agitated column as contactors for continuous counter-current extraction

Separation of cobalt and nickel by emulsion liquid membrane with the use of EDTA as masking reagent

Separation of nickel, cobalt and magnesium from the spent MH-NI and CD -NI battery anode materials

Emulsion liquid membrane technique for optimal separation of Ni (II) and Sm (III) using response surface methodology and Box–Behnken experimental setup

Cobalt separation from nickel in sulfate aqueous solution by a new extractant: Di-decylphosphinic acid (DDPA)

Separation of cobalt and nickel from chloride leach solution of nickel laterite ore by solvent extraction

Efficient Separation and High Selectivity for Nickel from Cobalt-Solution by a Novel Chelating Resin: Batch, Column and Competition Investigation

Removal of Impurities from Nickel and Cobalt in Mixed Hydroxide Precipitate with Solvent Extraction Using Di(2-Ethylhexyl) Phosphoric Acid

Study on Oil Separation from Oil/Water Emulsion via Coagulation and Ultrafiltration

Efficient Oil-Water Separation with Amphipathic Magnetic Nanoparticles of Fe3O4@TiO2

A robust superwetting nickel foam with tuning pore features for stable and efficient separation of oil-in-water emulsions

A sustainable separation strategy for recovering Sm/Co from SmCo magnets with fatty acid and primary amine

Optimization Study Of Operation Parameters For Extracting From Sulfuric Solution Containing With Lix984n In A Laminar Microchip

Simultaneous dissolution of nickel, copper and cobalt from low grade nickel matte by (NH4)2S2O8-H2SO4 oxidative leaching

SEPARATION PROPERTIES OF COPPER AND NICKEL FROM STRONG-ACIDITY AND HIGH-SALINITY WASTEWATER BY NOVEL PYRIDINE CHELATING RESIN

An efficiency strategy for cobalt recovery from simulated wastewater by biphasic system with polyethylene glycol and ammonium sulfate

Hydrodynamic features of pulsed solvent extractor for separation of two metals by using the antagonistic effect of solvents

Efficient separation and recovery of Co and Ni from ammonium sulfate roasting‐water leaching solutions of oceanic cobalt‐rich crusts by sulfide precipitation and P507–Cyanex 272 synergistic extraction

Process Optimization Using Box‐Behnken Design for the Solvent Extraction and Separation of Iron, Cobalt, and Nickel from Simulated Crud Solution