Abstract:Good gas permeability is an essential factor for the smooth operation and high performance in the lower part of the blast furnace. Under the present low carbon blast furnace smelting conditions, the coke layer is thinner, and the proportion of the molten metal in the coke layer is significantly higher, resulting in a major reduction in gas permeability, which seriously affects blast furnace operations. Also, the lower thickness of the coke layer weakens the process of solid-liquid carbon dissolution when the molten iron passes through the coke layer, which reduces the carbon content of the molten iron and further deepens the erosion of the refractory by the unsaturated molten iron. The carbon dissolution in the molten iron in a blast furnace core was measured by a high-temperature vacuum wettability test tool that analyzed the interface wetting activity between Fe−C melts with specific carbon mass fraction (3.8%, 4.3%, 4.8%) and 99.9% of high temperatures graphite plates. Besides, the scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the graphite substrate’s carburizing morphology and carburizing distances. The results show that, with the increase of carbon content, the interface contact angle becomes bigger. The contact angle decreases with time, and eventually reaches a steady-state during the melting process, and the Fe−C melt with saturated carbon cannot be wet. The scanning electron microscopy analysis shows that a spherical cap-like depression is created by a cross-section of the Fe−C melt and the graphite substrate, and the radius and volume of the depression decrease with increasing carbon content. The study of the EDS scanning analysis shows that the amount of dissolved carbon atoms in the graphite substrate penetrates the Fe−C melt and decreases with increasing initial carbon concentration. The smaller the carburizing effect, the better the wetting is conducive to carbon mass transfer. It is found that by measuring carburizing of the carbon atoms in the graphite substrate into the Fe−C melt by calculating the surface energy reduces the surface energy between the two. Thus, the surface tension decreases and the melt spreads slowly with contact angle gradually decreasing during melting.

A Research of the Influence on the Coking Technological Property by Adding Dusts of Blast Furnace Containing Iron and Carbon

Evolution of Coke Microstructure and Metallurgical Properties During Graphitization in a Blast Furnace

Influence of Petroleum Coke Added into Coal Blend on Coke Quality

Study on Combustion Performance of Blast Furnace Dust

Non-isothermal Thermogravimetric Investigation on Mutual Effect Between Bituminite and Anthracite in Blends for Blast Furnace Injection

Correction To: Thermal Analysis and Kinetic Modeling of Pulverized Coal Combustion Accompanied with Coke Breeze

EFFECT OF PARTICLE SIZE OF LEAN COAL,MEAGER LEAN COAL AND ANTHRACITE ON THE COKE QUALITY

Interface Wetting Behavior Between Iron and Coke During the Carbon Dissolution Process in a Blast Furnace

Effects of Iron Compounds on Pyrolysis Behavior of Coals and Metallurgical Properties of Resultant Cokes

Influence of Charcoal Replacing Coke on Microstructure and Reduction Properties of Iron Ore Sinter

Strength degradation mechanism of iron coke prepared by mixed coal and Fe2O3

Effect of Particle Size of Poor Caking Coal on Coking Property

Optimizing the performance of iron coke by coal blending: Insights from the metallurgical properties and structural characteristics

Influence of TiO2 Addition on the Structure and Metallurgical Properties of Coke

Study on the High-Temperature Interaction between Coke and Iron Ores with Different Layer Thicknesses

Effects of Coal and Iron Ore Blending on Metallurgical Properties of Iron Coke Hot Briquette

Effect of gasification reaction on pore structure, microstructure, and macroscopic properties of blast furnace coke

Interaction Mechanism Between Coal Combustion Products and Coke in Raceway of Blast Furnaces

Effect Of Iron Containing Metallurgical Byproducts On Pulverized Coal Combustion Efficiency

The Effect of CaO and MgO on the Structure and Properties of Coal Ash in the Blast Furnace: A Molecular Dynamics Simulation and Thermodynamic Calculation

Influence of Coke Deterioration Behavior in Blast Furnace on Microcrystalline Structure Characteristics