Abstract:Iron coke has gained widespread attention for its advantages in carbon reduction and efficient resource utilization. However, the structure and strength of iron coke have constrained its further advancement. This study systematically explores the impact of different coal blending structures on the three-dimensional structure and tensile strength of iron coke through three-dimensional reconstruction technology. It highlights the improvement mechanism of 1/3 coking coal addition on the microstructure and metallurgical properties of iron coke. The study shows that the tensile strength of iron coke increases with the addition of coking coal, while lean coal exhibits the opposite trend. The addition of an appropriate proportion of 1/3 coking coal (20–22 %) enhances the tensile strength and mechanical strength of iron coke, reaching the level of second-grade coke. However, an addition exceeding 22 % leads to increased porosity and reduced strength due to the high volatile content. Finite element analysis demonstrates that stress is primarily localized in regions with thinner pore walls and at the iron-carbon interface, and the aggregation effect of iron particles further causes stress concentration. Iron coke reactivity initially diminishes and subsequently rises with the addition of 1/3 coking coal, and it shows a linear negative correlation with the strength after reaction. Structural evolution reveals that the addition of 1/3 coking coal reduces the orderliness of carbon microcrystals, thereby increasing the active sites for gasification reactions. Meanwhile, the initial reduction followed by an increase in the specific surface area of iron coke can impact adsorption sites, thereby influencing reaction activity. These findings not only provide a new understanding of the structure-performance relationship of iron coke but also offer practical guidance for iron coke production.

Influence of Petroleum Coke Added into Coal Blend on Coke Quality

Influence of Blending Methods on the Co-Gasification Reactivity of Petroleum Coke and Lignite

Effects of Chemicals and Blending Petroleum Coke on the Properties of Low-Rank Indonesian Coal Water Mixtures

Optimizing the performance of iron coke by coal blending: Insights from the metallurgical properties and structural characteristics

A Research on Petroleum Coke Combustion Characteristics

Correction To: Thermal Analysis and Kinetic Modeling of Pulverized Coal Combustion Accompanied with Coke Breeze

Effect of Coal Moisture Content on Coke’s Quality and Yields of Products During Coal Carbonization

A RESEARCH ON N2O EMISSION OF PETROLEUM COKE COMBUSTION BLENDING WITH COAL IN CFB

Effect of Adding Coal Ashes and Oxide Mixtures on CO 2 Gasification Reactivity of Petcoke at High Temperature

EFFECT OF PARTICLE SIZE OF LEAN COAL,MEAGER LEAN COAL AND ANTHRACITE ON THE COKE QUALITY

Effect of High Calcium and High Iron Coal on Ash Fusion Characteristics of Petroleum Coke during Cogasification

Influence of Na2CO3 on combustion performance of civil clean coke

Research Development of Inert Material Blended Coal for Coking

Effects of coal moisture control and coal briquette technology on structure and reactivity of cokes

Study on Relationships between Coal Microstructure and Coke Quality during Coking Process

Study on gasification reactivity of high sulfur petroleum coke and coal mixture

Study on the interaction and coking characteristics of low-sulfur meager coal and medium-high sulfur fat coal during co-carbonization process

Coking behavior and mechanism of direct coal liquefaction residue in coking of coal blending

Experimental study on co-pyrolysis of petroleum coke and coals: Synergy effects and co-gasification reactivity

Effects of Coal and Iron Ore Blending on Metallurgical Properties of Iron Coke Hot Briquette

Distribution Characteristics of Coking Products and Mechanism of Tar Lightening in Preparation of High-Strength Gasification-Coke with Low-Rank Coal Blending