Abstract:A medium ash coal is used for the study. Four different samples have prepared by blending fine fraction (<38 µm) with four distinct coarse fractions (212 µm – 300 µm, 90 µm – 300 µm, 150 µm – 212 µm,75 µm – 150 µm) in the ratio of 40:60 and named as sample 1, sample 2, sample 3, sample 4, respectively. These four samples mixed with mixture of natural and chemical additive solution, i.e. saponin from shikakai and SDBS (sodium dodecyl benzene sulfonate) to reduce the viscosity and increase the stability of the slurry. The flow behavior of coal water slurry were characterized at different coal loadings, pH, dispersant contents with and without presence of mixture of bio and chemical additive. The flow behavior of the slurry studied in the solid concentration range of (58–68) % by weight and the behavior is well fitted to the Bingham plastic model which indicates non-Newtonian behavior in nature. Out of four samples, sample 1 shows maximum coal loading, i.e. 68% in the presence of mixture of additive, i.e. saponin and SDBS. For the solid loading of 68% by weight the apparent viscosity is 1.3 PaS for the shear rate 147 S−1. The ratio of saponin and SDBS is optimized on the basis of surface tension measurement and apparent viscosity of coal water slurry. During surface tension measurement the value of surface tension is 14 mN/m at the point of optimization of surfactant mixture percentage, i.e. saponin:SDBS = 92:8 and the viscosity of the surfactant/additive mixture at this optimization point is 0.403 Pa.S. The rheological behavior of the slurry has been measured. Effect of zeta potential of the coal particle has been studied in the presence of mixture of additive solution (saponin and SDBS). A suitable mechanism has given to explain the interaction between additive solution and coal surface.

Effects of Chemicals and Blending Petroleum Coke on the Properties of Low-Rank Indonesian Coal Water Mixtures

Slurry characteristics and mechanism analysis of petroleum coke-coal water slurry

Research on slurryability of petroleum coke

Influence of Petroleum Coke Added into Coal Blend on Coke Quality

Effects of Modified Sodium Lignosulfonate on Rheological Properties of Coal–Water Slurry with Low-Rank Coal

Effects of Blending Coals on the Behavior of Coal Water Slurry

Study on basic features of sludge coal water slurry

Slurryability of Petroleum Coke and Rheological Characteristics and Stability of PCWS

Effects of the Physical and Chemical Properties of Petroleum Coke on Its Slurryability

Effects of particle filling and gradation on the properties of coal-water slurries blended with semicoke

Experimental study on black water of coal gasification as stabilizer of petroleum coke-water slurry

Interaction between dispersant and coal slime added in semi-coke water slurry: An experimental and DFT study

Study on improving the performance of blended Semi-coke coal water slurry based on multi-peak gradation technology

Study on the Effects of Coal Blending on the Slurry Ability of Shenmu Coals

Effect of coal slag on stability of petroleum coke water slurry

Slurryability of lignite and petroleum coke mixture

Effect of Particle Size Distribution of Petroleum Coke on the Properties of Petroleum Coke–oil Slurry

Effect of mixture of natural and synthetic surfactant and particle size distribution for stabilized high-concentrated coal water slurry

Co-Slurry Ability of Refinery Oil Sludge and High Sulphur Petroleum Coke

Effect of the Structural Characteristics of Anionic Additive on the Properties of Coal Water Slurry

Effect of the Polymerization Degree of Polyoxyethylene Nonyl Phenyl Ether on the Properties of Coal Water Slurry