Abstract:This research aims to model and assess autonomous vehicle controller while including a four-wheel steering and longitudinal speed control. Such a modeling process simulates human driver behavior with consideration of real vehicle dynamics’ characteristics during standard maneuvers. However, a four-wheel steering control improves vehicle stability and maneuverability as well. A three-degree of freedom bicycle model, lateral deviation, yaw angle, and longitudinal speed is constructed to describe vehicle dynamics’ behavior. Moreover, a comprehensive traction model is implemented which includes an engine, automatic transmission, and non-linear magic formula tire model for simulation of vehicle longitudinal dynamics. A combination of proportional integral derivative (PID) longitudinal controller and fuzzy lateral controller are implemented simultaneously to track the desired vehicle path while minimizing lateral deviation and yaw angle errors. Then, A linear quadratic regulator (LQR) based rear steering controller is introduced to represent a performance improvement over front steering only. The longitudinal controller tries to maintain the desired speed through control of the engine throttle while the lateral controller steers the vehicle wheels to follow the pre-defined path. Path tracking simulation is executed through enjoining a referenced safe path to pass a simulated track based on ISO 3888 double lane change maneuver. Both longitudinal and lateral controllers’ simulation results achieved the required performance based on lateral deviation, yaw angle, front steering angle, and vehicle speed. Additionally, the lateral deviation is minimized according to the reference simulated path through the rear steering controller while decreasing vehicle yaw rate and slip angles for front and rear tires.

Kinematics and Trajectory Tracking Motion Plan of an Unmanned Bicycle

Design, Modeling And Trajectory Generation Of A Kind Of Four Wheeled Omni-Directional Vehicle

Constant-velocity Steering Control Design for Unmanned Bicycles

Steering Control and Stability Analysis for an Autonomous Bicycle through Reduced Dynamics with Servo-Constraints

Real-time Motion Planning and Trajectory Tracking in Complex Environments Based on Bézier Curves and Nonlinear MPC Controller

Trajectory control of a 2-DOF traveling wave type spherical ultrasonic motor

Dynamics Modeling and Trajectory Tracking Control of a Quadrotor Unmanned Aerial Vehicle

Design of Trajectory Tracking Controller with Backstepping Method for Quadrotor Unmanned Aerial Vehicles

Steering Control and Stability Analysis for an Autonomous Bicycle: Part I—theoretical Framework and Simulations

Steering Control of an Autonomous Unicycle

Research on Trajectory Planning and Tracking Algorithm of Crawler Paver

The Design of Driverless Vehicle Trajectory Tracking Control Strategy

Research on the Model Predictive Trajectory Tracking Control of Unmanned Ground Tracked Vehicles

Trajectory Tracking Optimal Control With Backstepping Method For Quadrotor Helicopter

Controller Design for Path Tracking of Autonomous Vehicle Incorporating Four-Wheel Steering System

Practical Nonlinear Model Predictive Controller Design for Trajectory Tracking of Unmanned Vehicles

Model predictive trajectory optimization and tracking for on-road autonomous vehicles

Steering control and stability analysis for an autonomous bicycle: part II experiments and a modified linear control law

Model-Based Planning and Control for Terrestrial-Aerial Bimodal Vehicles with Passive Wheels

Trajectory Tracking Control of Wheeled Mobile Robots Based on Integrated Intelligent Steering

Model-Based Coordinated Trajectory Tracking Control of Skid-Steer Mobile Robot with Timing-Belt Servo System