Abstract:This research aims to model and assess autonomous vehicle controller while including a four-wheel steering and longitudinal speed control. Such a modeling process simulates human driver behavior with consideration of real vehicle dynamics’ characteristics during standard maneuvers. However, a four-wheel steering control improves vehicle stability and maneuverability as well. A three-degree of freedom bicycle model, lateral deviation, yaw angle, and longitudinal speed is constructed to describe vehicle dynamics’ behavior. Moreover, a comprehensive traction model is implemented which includes an engine, automatic transmission, and non-linear magic formula tire model for simulation of vehicle longitudinal dynamics. A combination of proportional integral derivative (PID) longitudinal controller and fuzzy lateral controller are implemented simultaneously to track the desired vehicle path while minimizing lateral deviation and yaw angle errors. Then, A linear quadratic regulator (LQR) based rear steering controller is introduced to represent a performance improvement over front steering only. The longitudinal controller tries to maintain the desired speed through control of the engine throttle while the lateral controller steers the vehicle wheels to follow the pre-defined path. Path tracking simulation is executed through enjoining a referenced safe path to pass a simulated track based on ISO 3888 double lane change maneuver. Both longitudinal and lateral controllers’ simulation results achieved the required performance based on lateral deviation, yaw angle, front steering angle, and vehicle speed. Additionally, the lateral deviation is minimized according to the reference simulated path through the rear steering controller while decreasing vehicle yaw rate and slip angles for front and rear tires.

Steering Control of an Autonomous Unicycle

Steering Control and Stability Analysis for an Autonomous Bicycle through Reduced Dynamics with Servo-Constraints

Steering Control and Stability Analysis for an Autonomous Bicycle: Part I—theoretical Framework and Simulations

Constant-velocity Steering Control Design for Unmanned Bicycles

Steering control and stability analysis for an autonomous bicycle: part II experiments and a modified linear control law

Dynamics Modeling and Postural Stability Control of a Unicycle Robot

Adaptive Control for Simultaneous Stabilization and Tracking of Unicycle Mobile Robots

Steering and Formation Control of Unicycles Under Single-Rate Sampling

Intelligent Balancing and Trajectory Tracking Control for Unicycle Robots

Reduced Dynamics and Control for an Autonomous Bicycle

Some remarks on wheeled autonomous vehicles and the evolution of their control design

Nonholonomic dynamics and control of road vehicles: moving toward automation

Design of Robust Output-Feedback-based Automatic Steering Controller for Unmanned Electric Vehicles

Controller Design for Path Tracking of Autonomous Vehicle Incorporating Four-Wheel Steering System

Adaptive Control of Unicycle-Type Mobile Robots with Longitudinal Slippage

Adaptive Headway Motion Control and Motion Prediction for Safe Unicycle Motion Design

Automatic Steering Control Strategy for Unmanned Vehicles Based on Robust Backstepping Sliding Mode Control Theory.

Dynamic Modeling of an Unmanned Motorcycle and Combined Balance Control with Both Steering and Double CMGs

Design of Four Wheel Steering and Direct Yaw Moment Control for Unmanned Vehicle with Path Tracking Controller in Extreme Maneuvers

Lateral dynamics of single unit skid-steered tracked vehicle

Robust Control in Diagonal Move Steer Mode and Experiment on an X-by-Wire UGV