Abstract:This research aims to model and assess autonomous vehicle controller while including a four-wheel steering and longitudinal speed control. Such a modeling process simulates human driver behavior with consideration of real vehicle dynamics’ characteristics during standard maneuvers. However, a four-wheel steering control improves vehicle stability and maneuverability as well. A three-degree of freedom bicycle model, lateral deviation, yaw angle, and longitudinal speed is constructed to describe vehicle dynamics’ behavior. Moreover, a comprehensive traction model is implemented which includes an engine, automatic transmission, and non-linear magic formula tire model for simulation of vehicle longitudinal dynamics. A combination of proportional integral derivative (PID) longitudinal controller and fuzzy lateral controller are implemented simultaneously to track the desired vehicle path while minimizing lateral deviation and yaw angle errors. Then, A linear quadratic regulator (LQR) based rear steering controller is introduced to represent a performance improvement over front steering only. The longitudinal controller tries to maintain the desired speed through control of the engine throttle while the lateral controller steers the vehicle wheels to follow the pre-defined path. Path tracking simulation is executed through enjoining a referenced safe path to pass a simulated track based on ISO 3888 double lane change maneuver. Both longitudinal and lateral controllers’ simulation results achieved the required performance based on lateral deviation, yaw angle, front steering angle, and vehicle speed. Additionally, the lateral deviation is minimized according to the reference simulated path through the rear steering controller while decreasing vehicle yaw rate and slip angles for front and rear tires.

Constant-velocity Steering Control Design for Unmanned Bicycles

Steering Control and Stability Analysis for an Autonomous Bicycle through Reduced Dynamics with Servo-Constraints

Steering Control and Stability Analysis for an Autonomous Bicycle: Part I—theoretical Framework and Simulations

Steering Control for Autonomously Balancing Bicycle at Low Speed

Steering control and stability analysis for an autonomous bicycle: part II experiments and a modified linear control law

Steering Control of an Autonomous Unicycle

Dynamic Modeling of an Unmanned Motorcycle and Combined Balance Control with Both Steering and Double CMGs

Reduced Dynamics and Control for an Autonomous Bicycle

Controller Design for Path Tracking of Autonomous Vehicle Incorporating Four-Wheel Steering System

Control System Design of Self-balanced Bicycles by Control Moment Gyroscope

Automotive Steering System and Its Controller Design for Intelligent Vehicles

Combined control algorithm based on synchronous reinforcement learning for a self-balancing bicycle robot

Adaptive Control for Simultaneous Stabilization and Tracking of Unicycle Mobile Robots

An Automatic Steering and Tracking System for Autonomous Vehicles based on EPS

Gain Scheduled Controller Design for Balancing an Autonomous Bicycle

Intelligent Balancing and Trajectory Tracking Control for Unicycle Robots

Balancing control of a bicycle-riding humanoid robot with center of gravity estimation

Automatic Steering Control Strategy for Unmanned Vehicles Based on Robust Backstepping Sliding Mode Control Theory.

A bilateral control scheme for vehicle steer-by-wire system with road feel and steering controller design

Design of Four Wheel Steering and Direct Yaw Moment Control for Unmanned Vehicle with Path Tracking Controller in Extreme Maneuvers

Design of Zero-Differential Steering Controller for Tracked Vehicles With Hydraulic-Mechanical Transmission Based on Particle Swarm Optimization Algorithm