Abstract:Transverse joints are introduced in jointed plain concrete pavement systems to mitigate the risk of cracks that can develop due to shrinkage and temperature variations. However, the structural behaviour of jointed plain concrete pavement (JPCP) is significantly affected by the transverse joint, as it creates a discontinuity between adjacent slabs. The performance of JPCP at the transverse joints is enhanced by providing steel dowel bars in the traffic direction. The dowel bar provides reliable transfer of traffic loads from the loaded side of the joint to the unloaded side, known as load transfer efficiency (LTE) or joint efficiency (JE). Furthermore, dowel bars contribute to the slab's alignment in the JPCP. Joints are the critical component of concrete pavements that can lead to various distresses, necessitating rehabilitation. The Swedish Transport Administration (Trafikverket) is concerned with the repair of concrete pavement. Precast concrete slabs are efficient for repairing concrete pavement, but their performance relies on well-functioning dowel bars. In this study, a three-dimensional finite element model (3D-FEM) was developed using the ABAQUS software to evaluate the structural response of JPCP and analyse the flexural stress concentration in the concrete slab by considering the dowel bar at three different locations (i.e., at the concrete slabs' top, bottom, and mid-height). Furthermore, the structural response of JPCP was also investigated for several important parameters, such as the joint opening between adjacent slabs, mispositioning of dowel bars (horizontal, vertical, and longitudinal translations), size (diameter) of the dowel bar, and bond between the slab and the dowel bar. The study found that the maximum LTE occurred when the dowel bar was positioned at the mid-depth of the concrete slab. An increase in the dowel bar diameter yielded a 3% increase in LTE. Conversely, the increase in the joint opening between slabs led to a 2.1% decrease in LTE. Additionally, the mispositioning of dowel bars in the horizontal and longitudinal directions showed a 2.1% difference in the LTE. However, a 0.5% reduction in the LTE was observed for a vertical translation. Moreover, an approximately 0.5% increase in LTE was observed when there was improved bonding between the concrete slab and dowel bar. These findings can be valuable in designing and evaluating dowel-jointed plain concrete pavements.

The Dowel Group Action in Jointed Concrete Pavement

Research on Load Transfer Efficiency of GFRP Dowel in Jointed Plain Concrete Pavement

A Parametric Study Investigating the Dowel Bar Load Transfer Efficiency in Jointed Plain Concrete Pavement Using a Finite Element Model

Load Transfer Characteristics and Durability Study of GFRP Dowels in Jointed Concrete Pavement

Finite Element Investigation of the Deterioration of Doweled Rigid Pavements

Performance Properties of Gfrp Dowels in Concrete Pavement Joints

Extended finite element analysis of ultimate load-bearing capacity for dowel bar system in cement concrete pavement

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Effect of Dowel Joints on Dynamic Behavior of Train–discrete Floating Slab Track System

Numerical investigation on the behaviour of the high-strength ring strengthened dowel connection under vertical load

Performance Analysis and Optimization of Dowels in Jointed Concrete Floors

The Analysis of Dowel and Tie Bars Effects on Curling Up in Concrete Pavement Slabs

Experimental study on mechanical properties of dowel bar embedded in concrete under fatigue loads

An analysis of the mechanical properties of precast steel fiber reinforced concrete pavement joints

Three-Dimensional Bond Model Considering the Coupled Damage Effect for Dowel Action

Evaluation of the impact of selected material and technological parameters of dowel bars on the behaviour of Portland Cement Concrete pavement

Laboratory testing, field construction, and decade long performance evaluation of jointed plain concrete pavement with FRP dowels

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Experimental investigation of dowel action in reinforcing bars using refined measurements

Research on the Behavior of Rigid Pavement of Basalt Fiber Reinforced Dowel Bar under the Condition of Variable Temperature