Abstract:Transverse joints are introduced in jointed plain concrete pavement systems to mitigate the risk of cracks that can develop due to shrinkage and temperature variations. However, the structural behaviour of jointed plain concrete pavement (JPCP) is significantly affected by the transverse joint, as it creates a discontinuity between adjacent slabs. The performance of JPCP at the transverse joints is enhanced by providing steel dowel bars in the traffic direction. The dowel bar provides reliable transfer of traffic loads from the loaded side of the joint to the unloaded side, known as load transfer efficiency (LTE) or joint efficiency (JE). Furthermore, dowel bars contribute to the slab's alignment in the JPCP. Joints are the critical component of concrete pavements that can lead to various distresses, necessitating rehabilitation. The Swedish Transport Administration (Trafikverket) is concerned with the repair of concrete pavement. Precast concrete slabs are efficient for repairing concrete pavement, but their performance relies on well-functioning dowel bars. In this study, a three-dimensional finite element model (3D-FEM) was developed using the ABAQUS software to evaluate the structural response of JPCP and analyse the flexural stress concentration in the concrete slab by considering the dowel bar at three different locations (i.e., at the concrete slabs' top, bottom, and mid-height). Furthermore, the structural response of JPCP was also investigated for several important parameters, such as the joint opening between adjacent slabs, mispositioning of dowel bars (horizontal, vertical, and longitudinal translations), size (diameter) of the dowel bar, and bond between the slab and the dowel bar. The study found that the maximum LTE occurred when the dowel bar was positioned at the mid-depth of the concrete slab. An increase in the dowel bar diameter yielded a 3% increase in LTE. Conversely, the increase in the joint opening between slabs led to a 2.1% decrease in LTE. Additionally, the mispositioning of dowel bars in the horizontal and longitudinal directions showed a 2.1% difference in the LTE. However, a 0.5% reduction in the LTE was observed for a vertical translation. Moreover, an approximately 0.5% increase in LTE was observed when there was improved bonding between the concrete slab and dowel bar. These findings can be valuable in designing and evaluating dowel-jointed plain concrete pavements.

Laboratory testing, field construction, and decade long performance evaluation of jointed plain concrete pavement with FRP dowels

Development of a Steel Fiber-Reinforced Rubber Concrete for Jacketing of Bridge Piers Against Vehicular Impacts: Preliminary Results

Remote Collaborative Pseudo-dynamic Testing of Carbon Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Experimental Research on Novel RPC-steel Composite Connections for Prefabricated Glubam-Concrete Composite Beams

A Parametric Study Investigating the Dowel Bar Load Transfer Efficiency in Jointed Plain Concrete Pavement Using a Finite Element Model

An analysis of the mechanical properties of precast steel fiber reinforced concrete pavement joints

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Experimental investigation on shear behavior of double-row perforated GFRP rib connectors in FRP-concrete hybrid beams

Connection of the prefabricated updeck of road tunnels by a short lap-spliced joint using ultra-high-performance fiber-reinforced concrete

Performance Improvement of a Fiber-Reinforced Polymer Bar for a Reinforced Sea Sand and Seawater Concrete Beam in the Serviceability Limit State

FRP bar-reinforced ultra-high-performance concrete plates with a grouting sleeve connection: Development and flexural behavior

Experimental Study on Flexural Capacity of RC Beams with Cross-Section Patching Repair and Strengthening by CFRP Sheet

Novel Joint for Pultruded FRP Beams and Concrete-Filled FRP Columns: Conceptual and Experimental Investigations

Evaluation of deflection in concrete members reinforced with fibre reinforced polymer (FRP) bars

Experimental Study on Tensile Behavior of Wet Joints in A Prefabricated Composite Deck System Composed of Orthotropic Steel Deck and Ultrathin Reactive-Powder Concrete Layer

Fracture performance of externally FRP strengthened reinforced concrete beams mixed with rigid fibres

Experimental determination of the fatigue behavior of dowel strips in ortho‐composite slabs for road bridges

Quantifying the Residual Stiffness of Concrete Beams with Polymeric Reinforcement under Repeated Loads

Experimental and Numerical Analysis of Steel-Polypropylene Hybrid Fibre Reinforced Concrete Deep Beams

Experimental and Numerical Investigations on Seismic Behavior of RC Beam to PVC-CFRP Confined Concrete Column Exterior Joint with Steel Tube Connector

Experimental study on the flexural performance of FRP grid-reinforced ultra-high-performance concrete I-beams with different steel fiber contents