Abstract:Two levels of non-refractory (V and Ti) and refractory (Mo, Nb and Ta) alloying elements were added to Co-9Al-10W ternary alloy (at.%, baseline alloy) in order to investigate alloying effects on phase equilibria, microstructural features of gamma' phase and secondary phases at 1300 degrees C and 900 degrees C, respectively. It is suggested that refractory alloying additions promoted the precipitation of the mu phase at 1300 degrees C. The phase equilibria changed from gamma single-phase region in the baseline alloy to gamma+mu two-phase region in quaternary alloys containing high levels of refractory alloying elements (4 at.%) at 1300 degrees C. The mu phase was enriched in W, Mo, Nb and Ta, but depleted in AI, V and Ti. For quaternary alloys with low levels of alloying additions (2 at.%), the gamma/gamma' two-phase microstructure was observed after aging treatment at 900 degrees C for 50h and 300h, but small amounts of the plate-like DO19 phase precipitated in the matrix of 2Mo and 2Nb alloys. The volume fractions of the gamma' phase were at very high level in the range of 74% to 83% in all these experimental alloys. Compared with the baseline alloy, alloying additions did not show the strong effect on gamma' morphology, which remained cuboidal after long term aging except Mo addition. For quaternary alloys with high levels of alloying additions after aging at 900 degrees C, the DO19 phase precipitated in addition to gamma and gamma' phases, as well as the blocky mu phase inherited from the precipitation at 1300 degrees C. There were two types of the DO19 phase: one was plate-like and precipitated in the matrix; the other was blocky and transformed from the previous mu phase. Again, refractory alloying additions (Mo, Nb and Ta) promoted phase transformation for both types of the DO19 phase. The current study is helpful to understand phase equilibria and microstructure in Co-Al-W-base alloys and further develop multi-component gamma'-strengthened Co-base superalloys.

Microstructural Formation in Novel Co-Base ODS Alloys Produced by Mechanical Alloying

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Effect of Minor Addition of Co on Nonequilibrium Solidification of Deeply Undercooled Cu Based Alloys

Microstructure Control and Micromechanical Property Enhancement of CoCrFeNiZr 0.5 Alloy under Melt Quenching and Electrostatic Levitation Conditions

Mechanical alloying of ODS tungsten heavy alloys and microstructure development of intermetallic compounds

Microstructure Formation Mechanism of Rapidly Solidified Ternary Co-Cu-Pb Monotectic Alloys

Rapid Growth Kinetics and Microstructure Modulation of Intermetallic Compounds Within Containerlessly Solidifying Mo-Co Refractory Alloys

Microstructural Evolution, Thermal Stability and Microhardness of the Nb–Ti–Si-Based Alloy During Mechanical Alloying

Microstructure and Tensile Behavior of a Novel Monocrystalline Co‐Based Superalloy at Different Temperatures

Microstructural Evolution of a Newly Developed γ' Strengthened Co-base Superalloy

Microstructures and Mechanical Properties of a L1 2 -structured precipitation Strengthened Co-based Superalloy

Phase separation of a supersaturated nanocrystalline Cu Co alloy and its influence on thermal stability

Probing the formation mechanism of hierarchical microstructures in experimental Ni-based superalloys

Microstructures and Mechanical Properties of a Cu-bearing ODS Steel Fabricated by Mechanical Alloying and Hot Extrusion

Microstructure evolution and mechanical properties of CoCrFeNiAl0.3 high entropy alloy produced by ball milling in combination with thermomechanical consolidation

Evolution Mechanism of the Core-Shell to Homogeneous Microstructure in Immiscible Alloy by Semi-Solid Treatment under a High Magnetic Field

ALLOYING EFFECTS ON HEAT-TREATED MICROSTRUCTURE IN CO-AL-W-BASE SUPERALLOYS AT 1300 degrees C AND 900 degrees C

New Insights on the Formation of Supersaturated Cu-Nb Solid Solution Prepared by Mechanical Alloying

Microstructure, Phase Stability and Element Partitioning of Γ-Γ′ Co-9Al-9W-2X Alloys in Different Annealing Conditions

Microstructure Formation in a Directionally Solidified Immiscible Alloy

Microstructure and Mechanical Behavior of a Novel Co20Ni20Fe20Al20Ti20 Alloy Fabricated by Mechanical Alloying and Spark Plasma Sintering