Abstract:The use of reduced graphene oxide (rGO) as a novel support for the CuO-ZnO-ZrO2-Al2O3/rGO (CZZA/rGO) catalyst in forming methanol by carbon dioxide hydrogenation has been studied herein. Furthermore, the CuO-ZnO-ZrO2-Al2O3 (CZZA) catalyst was also prepared to compare catalytic performance. The catalysts were characterized using BET specific surface area, X-ray diffraction (XRD), H-2-temperature programmed reduction (H-2-TPR), scanning electron microscopy (SEM), H-2-temperature-programmed desorption (H-2-TPD) and CO2-temperature-programmed desorption (CO2-TPD) techniques and were evaluated by a fixed-bed reactor for methanol synthesis from the hydrogenation of carbon dioxide. The characterization results show that the surface area of the CZZA/rGO catalyst was 125.6 m(2)/g and the adsorption capacity of H-2 and CO2 increased remarkably due to the support of rGO. Moreover, the CO2 conversion over the CZZA/rGO catalyst was 14.7% under optimum reaction conditions (a temperature of 513 K, a pressure of 20 bar, and a space velocity of 6075h(-1)). The methanol yield was 11.6%, while that of CZZA catalyst without rGO support was only 9.8%. The superior activity of the CZZA/rGO catalyst could be attributed to its large surface area and high H-2 and CO2 adsorption capacity, which prevent the catalyst sintering and led to a higher CO2 conversion and methanol selectivity. (C) 2016 Elsevier Ltd. All rights reserved.

Characterization and Catalytic Performance Study of CuO-ZnO-ZrO2-TiO2 Catalyst for Methanol Synthesis from Carbon Dioxide Hydrogenation

A Graphene-Supported Copper-Based Catalyst for the Hydrogenation of Carbon Dioxide to Form Methanol

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Synthesis, characterization and activity pattern of Cu–ZnO/ZrO2 catalysts in the hydrogenation of carbon dioxide to methanol

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

Methanol Synthesis from CO 2 Hydrogenation on CuO–ZnO–ZrO 2 Prepared by Solvothermal Method: the Influence of Solvent on Catalyst Properties and Catalytic Behavior

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

Performance of Cu-Mn-Zn/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: The effect of Zn content

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol

Solvothermal Preparation of CuO-ZnO-ZrO2 Catalysts for Methanol Synthesis Via CO2 Hydrogenation

A High Activity Cu/ZnO/Al2O3 Catalyst for Methanol Synthesis: Preparation and Catalytic Properties

Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation

A practical approach for the preparation of high activity Cu/ZnO/ZrO2 catalyst for methanol synthesis from CO2 hydrogenation

Copper-doped ZnO-ZrO2 solid solution catalysts for promoting methanol synthesis from CO2 hydrogenation

Development of highly stable catalyst for methanol synthesis from carbon dioxide

Kinetics of Methanol Synthesis from Carbon Dioxide Hydrogenation over Copper–Zinc Oxide Catalysts

CO 2 Hydrogenation to Methanol in a Slurry Reactor: Catalytic Performance of CuO-Enhanced In 2 O 3 /ZrO 2

Synthesis of a Cu@ZnO1-x/Al2O3 Catalyst with High-Density ZnO1-x-Cu Interfacial Sites for Enhanced CO2 Hydrogenation to Methanol

Enhanced Methanol Synthesis via CO2 Hydrogenation over ZnO/ZrO2 Catalysts by the Regulation of Precipitation Method

Preparing methods of CuO/ZnO/Al2O3 catalysts for the synthesis of methanol