Abstract:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Ahead of Print. Wear is a significant cause of material loss, contributing to surface degradation of crucial components, notably within engineering sectors. This article is dedicated to enhancing tribological properties through the implementation of Al2O3-based ceramic coatings, specifically targeting situations where reciprocating sliding wear predominates. This study introduces lanthanum oxide (La2O3), a rare earth oxide, as a reinforcing material in Al2O3 coatings in varying weight percentages of 1.2%, 1.6%, and 1.8% respectively along with 3% hexagonal boron nitride (h-BN). The coatings were developed by the high-velocity oxy-fuel (HVOF) surface modification technique, with SS304 serving as the substrate. The porosity, hardness, and chemical composition of the developed coatings were examined. Additionally, reciprocating tribological testing of the coatings was conducted at two loads (5 N and 15 N) under dry sliding conditions. Results indicated that coating containing 95.4% Al2O3–3% h-BN–1.6% La2O3 reduced the porosity up to 50% and improved hardness by 46% compared to the 97% Al2O3–3% h-BN coating. The formation of the α-Al2O3 phase leads to an increase in coating hardness and a reduction in porosity. Notably, the coating comprising 97% Al2O3–3% h-BN exhibited the lowest coefficient of friction among all developed coatings under both loads. Furthermore, an increase in load led to a decrease in the coefficient of friction for all developed coatings. Furthermore, the addition of La2O3 (1.6 wt%) to the coating with 3 wt% h-BN exhibited the lowest wear at both loads. The findings also revealed increased wear at high loads for all developed coatings. SEM, EDS, and XRD analysis of the worn surfaces revealed the contribution of h-BN and La2O3 in enhancing friction behavior through the formation of oxides such as α-Al2O3, B2O3, Al8B2O15, and Al11La0.497O17, along with alterations in wear mechanism and the size of wear debris. The composite coatings developed in this study shall be helpful in advanced engineering applications.

Effect of N-Lab4o7 Additive on Tribological Behaviors of Ion Nitrocarburized Layer at Higher Temperature

Tribological Properties of FeNiCr Coatings with the Addition of La2O3 on 1045 Carbon Steel

Structural and Tribological Properties of Sulfonitrocarburizing Layers Prepared by Plasma Nitrocarburizing and Low Temperature Ion Sulfurizing

Synergism of h-BN and La2O3 in improving the tribological performance of Al2O3 coatings

The Effect of N Content on the Microstructure and Wear Resistance of Improved High-Carbon Chromium Bearing Steel

Synergetic effect between the surface treated with ion nitriding and extreme pressure-antiwear additives under boundary lubrication

Study on Tribological Properties of Organic Bismuth Compounds As Lubricationg Additive

The Combined Effect of La and Heat Treatment on the Tribological Performances of Tin-Babbitt Alloy

Influence of Ni-addition on Mechanical, Tribological Properties and Oxidation Resistance of AlCrSiN Coatings

Study on Microstructural and Tribological Properties of Sulphonitrocarburized Layers Diffused by Hollow Cathode Discharging

Effect of La 2 O 3 on Microstructure, Mechanical and Tribological Properties of Ni-W Coatings

Interface Microstructure and Tribological Properties of Flame Spraying NiCr/La2O3 Coatings

Effect of LaB6 addition on the in-situ synthesis of TiB /Ti Ni /TiC reinforced Ni-based composite coatings

Synergistic Tribological Performances Of Borate Additive In Lubricants

Effects of La2O3 on microstructure and wear properties of thermal clad NiCoW/ La2O3 composite coatings

The Effects of Adding Aluminum on Crystal Structure, Mechanical, Oxidation Resistance, Friction and Wear Properties of Nanocomposite Vanadium Nitride Hard Films by Reactive Magnetron Sputtering

Effect of Ag addition on high-temperature self-lubricating behavior of CuNi-based composites

<i>In vitro</i> bio-tribological behaviour of textured nitride coating on selective laser melted Ti-6Al-4V alloy

Study on the Synergistic Effect between the Plasma Nitrided Steel Surface and Different Lubrication Additives

Tribological Performances and Mechanism of Bismuth Dialkyl-Dithiocarbamate Additive

Effect of Ag2Mo2O7 incorporation on the tribological characteristics of adaptive Ni-based composite at elevated temperatures