Abstract:The working portfolio to explore the effects of isothermal annealing on mechanical properties of HFDM‐prepared composites. Fused deposition modeling (FDM) based large‐area additive manufacturing has advanced significantly, particularly for producing large parts with high‐performance short fibrous composites. To improve the mechanical performance of these manufactured parts, isothermal annealing is often employed as a post‐treatment for FDM‐produced components. Hence, this study examines the impact of isothermal annealing on the mechanical properties of short carbon fiber‐filled Polyamide 12 (PA12‐CF) and polyethylene terephthalate glycol (PETG‐CF). Samples are prepared using a customized high‐extrusion‐rate FDM (HFDM) system with varying key printing parameters (layer height and extrusion width). Three‐point bending tests are employed to assess the bending strength, modulus, and fracture deflection of the samples. Results show that annealing treatment significantly enhances the bending performance of PA12‐CF, with strength and modulus increasing by 27.8% and 31.2%, respectively. In contrast, PETG‐CF exhibits relatively minor improvements in bending strength (8.1%) and modulus (2.7%). Optical microscopy reveals that different printing parameters notably influence the alignment of short carbon fibers, affecting the mechanical properties, while the annealing treatment does not alter these parameter‐dependent trends. Finite element simulations further demonstrate that the presence of carbon fibers contributes to a progressive enhancement of the polymer matrix, which impacts mechanical improvement during annealing. Highlights High‐extrusion‐rate FDM is used to prepare PA12 and PETG composite samples. Annealing improves properties more in semi‐crystalline PA12‐CF samples. Meso‐structural analysis reveals that printing parameters play a crucial role. Short‐carbon‐fiber boosts strengths of the polymer matrix during annealing.

The Influence of Preheating on Automated Fiber Placement Speed

Thermal Management for Thermoset Automated Fiber Placement Based on Infrared Heater Structure Arrangement

As-built FE Thermal Analysis for Complex Curved Structures in Automated Fiber Placement

Analysis and Characterization of Interlaminar Tack for Different Prepreg Materials During Automated Fiber Placement

Temperature Field in the Heat Transfer Process of PEEK Thermoplastic Composite Fiber Placement

Influences of Wrinkles Induced by Tows’ Offset in Automated Fiber Placement on the Bending Properties of Composites

The effect of temperature field on the characteristics of carbon fiber reinforced thermoplastic composites in the laying and shaping process

Compaction Pressure Distribution and Pressure Uniformity of Segmented Rollers for Automated Fiber Placement

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Efficient 3D temperature field prediction and visualization for AFP process analysis in composite structures

Influence of Process Parameters on the Interlaminar Shear Strength of CF/PEEK Composites In-Situ Consolidated by Laser-Assisted Automated Fiber Placement

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

A combined method for analyzing the effective thermal conductivity evolution of satin weave thermoset prepregs during preforming process

The effects of processing parameters on the wedge peel strength of CF/PEEK laminates manufactured using a laser tape placement process

Influences of heat treatment on mechanical properties of SCF/PEEK composites in FDM‐3D printing process with UV laser assistance

Multiphysics Coupling Study on Impregnation Process of Hot-Melt Resin in Fiber Fabrics for Composite Material Production

Characteristics of in-situ automated fiber placement carbon-fiber-reinforced low-melt polyaryl ether ketone laminates part 1: Manufacturing influences

Influences of isothermal annealing post‐treatment on mechanical performances in fused deposition modeling manufactured short carbon fibrous PETG and PA composites

Numerical and experimental study of the viscosity and mechanical parameters effect on tow feeding quality during automated fiber placement

The Effects of Laser-Assisted Winding Process Parameters on the Tensile Properties of Carbon Fiber/Polyphenylene Sulfide Composites