Abstract:A modified sol-gel process for lead zirconate titanate (PZT) thin film deposition has been presented to overcome the problems of film cracking, short-circuiting and diffusion of PZT to substrate. In the modified sol-gel process, we pattern the pyrolyzed PZT thin film by wet etching before every treatment of post-annealing for crystallization. The modification brings two advantages: film cracking is eliminated due to the reduction of internal stress; PZT diffusion to substrate is avoided due to removing PZT film from the areas without Pt buffer layer before high-temperature post-annealing treatment. The modified sol-gel process is applied to fabrication of piezoelectric cantilever, which includes sputtering and patterning top and bottom electrodes, depositing PZT layer by the modified sol-gel process and releasing cantilever structure by a double side deep reaction ion etching process. After the fabrication, performances of PZT thin film such as hysteresis loop upon polarization and X-ray diffraction pattern are evaluated. Finally, resonant frequency is measured for the fabricated piezoelectric cantilever to verify its self-exited capability for future applications as micro sensors or actuators. These experimental results indicate that the modified sol-gel process for PZT deposition can greatly improve quality and yield rate of the fabrication of piezoelectric devices without causing any adverse effect.

A Zno Driven Silicon Cantilever for Nanoscale Actuation

A Micromachined ZnO Driven Cantilever Actuator for Nano Positioning

A Zno Thin-Film Driven Microcantilever for Nanoscale Actuation and Sensing

A ZnO microcantilever for high-frequency nanopositioning: Modeling, fabrication and characterization

Preparation and characterization of ZnO microcantilever for nanoactuation

Fabrication and characterization of SiO2 microcantilever for microsensor application

Electrical Actuation and Readout in a Nanoelectromechanical Resonator Based on a Laterally Suspended Zinc Oxide Nanowire

Fabrication And Performance Of Zno Piezoelectric Cantilever For Vibration Energy Harvesting

Silicon Micromachined Resonant Accelerometer Based on ZnO Nanowire

Large-displacement Actuating and High-Frequency Vibrating Characteristics of Silicon-Based Antiferroelectric (pb, La)(Zr, Ti)O3 Thick-Film Micro-Cantilevers

Design and Fabrication of a High-Speed Linear Piezoelectric Actuator with Nanometer Resolution Using a Cantilever Transducer

The Simulation Analysis of Nano-Zno Piezoelectric Film Based on Spm Micro- Cantilever

Size Effect in A Cantilevered Zno Micro/Nanowire and Its Potential As A Performance Tunable Force Sensor

Fabrication and Characterization of Microcantilever Integrated with PZT Thin Film Sensor and Actuator

Micro-actuator device characteristics study on lead-based antiferroelectric thick films of (Pb,La)(Zr,Ti)O3

Fabrication and Characterization of a High Q-Factor Microcantilever Enhanced by Lead Zirconate Titanate Thick Film

High-frequency Vibration Characteristic of Pb 0.97 La 0.02 (zr 0.95 Ti 0.05 )O 3 Anti-Ferroelectric Thick Films Cantilever

Design of a Hybrid Micro/Nano Cantilever-based Resonant Sensor and its Fabrication Method

Nonlinear dynamics of nanoelectromechanical cantilevers based on nanowire piezoresistive detection

Fabrication and Characterization of Piezoelectric Cantilever for Micro Transducers

High Quality Factor Silicon Cantilever Driven by PZT Actuator for Resonant Based Mass Detection