Abstract:<p>Fiber reinforced polymers (FRPs) are increasingly used in thick primary load-bearing structures. Nevertheless, manufacturing and in-service defects occur with a higher chance as the FRP thickness increases and thus the potential structure defects should be detected and evaluated. To image defects in thick FRP over 10 mm thick, this study proposes a frequency-and-structure dependent time-corrected ultrasonic total focusing method (FS-TFM) based on Floquet wave theory, which differs from conventional TFM that the wave velocity correction along different propagation direction bases on not only the structural anisotropy and inhomogeneity of FRP, but also on the probing frequency. First an analytical Floquet-wave-based dynamic homogenization for a crossply FRP laminate is performed, to obtain the homogenization region and then the wave anisotropy and dispersion therein. Then numerical finite element analysis follows, to further interrogate the time domain feature of wave signals. With the understanding of wave propagation, by accurately correcting the wave velocity anisotropy related to both the inspected crossply FPR and wave frequency, the FS-TFM imaging technique is proposed to focus the defect-scattered wave energy on the defect location. In addition, the signal-to-noise ratio (SNR) analysis of side-drilled-hole (Ø2 mm) imaging via different imaging algorithms shows that the proposed FS-TFM achieves the highest SNR at the frequency approaching the upper limit of the homogenization region. Finally, the experimental validation further indicates the potential of the proposed FS-TFM for accurate defect imaging in thick FRP.</p>

Velocity Correction of Total Focusing Method and its Application to Ultrasonic Inspection of Composite Laminate

Adaptive Total Focusing Method for Ultrasonic Full-Matrix Imaging of Anisotropic CFRP Laminates

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Research on Internal Defect Detection of Epoxy Glass Fiber Composites Based on Terahertz Imaging Technology

Ultrasonic Phased Array Imaging Approach Using Omni-Directional Velocity Correction for Quantitative Evaluation of Delamination in Composite Structure

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Floquet wave theory-based time-corrected ultrasonic total focusing method for fiber-reinforced composite laminate

Simultaneous Measurement of Local Longitudinal and Transverse Wave Velocities, Attenuation, Density, and Thickness of Films by Using Point-Focus Ultrasonic Spectroscopy

An optimized total focusing method based on delay-multiply-and-sum for nondestructive testing

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Defect imaging based on laser ultrasonic frequency domain synthetic aperture focusing technology with separated generation–detection and 2-D equivalent velocity mapping

Optimized ultrasonic total focusing imaging of diverse and multiple defects in crossply CFRP: Floquet wave theory, numerical simulation, and experimental validation

Real-Time Total Focusing Method Imaging for Ultrasonic Inspection of Three-Dimensional Multilayered Media

A modified synthetic aperture focusing algorithm used for transmission detection based on laser ultrasonics method

Adaptive ultrasonic full-matrix imaging of internal defects in CFRP laminates with arbitrary stacking sequences

Improved Total Focusing Method ( ITFM ) for ultrasonic imaging of thick walled welds based on ray-tracing algorithm

Real Aperture Continuous Terahertz Imaging System and Spectral Refinement Method

Non-contact detection of the interfacial microdefects in metal/CFRP hybrid composites using air-coupled laser ultrasound

Multi-frequency Fused Lock-in Thermography in Detecting Defects at Different Depths

Use of line laser scanning thermography for the defect detection and evaluation of composite material

Total Focusing Method for Ultrasonic Non-Destructive Inspection of Homogenous Objects Based on Elliptical Arc Scan-Conversion