Abstract:Q&P steels possessing a combination of ultra-high product of strength and tensile elongation (PSE) and superior impact toughness was obtained by tailoring the micromechanical deformation ability of retained austenite (RA) and martensite via low-temperature partitioning. Our results indicate that impact toughness is more susceptible to the heterogeneity of mechanical properties of constituent phases than its tensile mechanical properties. Through optimizing the difference between the constituent phases, the impact toughness can be improved significantly by the enhancement of micromechanical deformation ability of tempered martensite (TM) and corresponding alleviation of deformation incompatibility. Simultaneously, high PSE was preserved by using the deformation potential of RA and its transformation-induced plasticity effect. Load–unload–reload (LUR) tests were carried out to characterize the evolution of flow stress components and the influence of partitioning temperatures on the degree of deformation inhomogeneity between constituent phases during plastic deformation. Furthermore, the mechanical properties and micromechanical deformation ability of the constituent phases were quantitatively characterized using the nanoindentation technique, which indicates that degree of incompatible deformation is alleviated for steels partitioned at relatively high temperatures due to the enhancement of the deformation ability of TM. The underlying relationship between the dynamic transformation of metastable austenite based on the Olson and Cohen model, and high PSE was elucidated. As the partitioning temperature increases, the mechanical stability of RA increases, which is attributed to the synergistic effect of carbon partitioning and the improvement of compatible deformation capability of TM and RA, resulting in an excellent combination of concurrent ductility and impact toughness. Based on the above characterization and analysis, further investigation into the fractured morphology of impact and edge notched specimens was carried out to provide a comprehensive understanding of the damage and fracture mechanism, and to reveal the reasons for the improvement of mechanical properties. The nucleation position and propagation path of microvoids and microcracks depend on the deformation compatibility of constituent phases and the morphology of cementite in tempered martensite. The nucleation sites of microcracks and microvoids at the phase interface, due to stress concentration and dislocation pile-ups for incompatibility deformation of constituent phases, are substituted with nucleation sites at fractured cementite in TM with the increasing partitioning temperature.

Experimental Study on the Effect of Retained Austenite on the Impact Toughness of a Low-Carbon Martensite Steel

A New Effect of Retained Austenite on Ductility Enhancement of Low Carbon Q-P-T Steel

Effect of Retained Austenite on the Dynamic Tensile Behavior of A Novel Quenching-Partitioning-Tempering Martensitic Steel

Achieving High Plasticity and High Toughness of Low-Carbon Low-Alloy Steel through Intercritical Heat Treatment

Effect of Austenitized Holding Temperature on Microstructure and Properties of Low-carbon Steel After I&Q&P Treatment

The Role of Retained Austenite on the Mechanical Properties of a Low Carbon 3Mn-1.5Ni Steel

Effects of Novel Q-P-T and Traditional Q-T Processes on the Microstructure and Mechanical Properties of Martensitic Steels with Different Carbon Content

Effect Of Q-P-T Process On The Microstructure And Mechanical Properties Of 300m Steel

Retained Austenite Control and Extra-Cryogenic Impact Toughness of Fe-3.0%Mn Low Carbon Steel

Inconsistent effects of mechanical stability of retained austenite on ductility and toughness of transformation-induced plasticity steels

Enhancement of Impact Toughness Via Tailoring Deformation Compatibility of Constituent Phases in Duplex Q&P Steel with Excellent Strength and Ductility

Effect of Retained Austenite on Impact Toughness and Fracture Behavior of Medium Carbon Submicron-Structured Bainitic Steel

Effect of Precursor Microstructure on Retained Austenite and Mechanical Property of Low Carbon Steels with Iq&P Treatments

Relation of Martensite-Retained Austenite and Its Effect on Microstructure and Mechanical Properties of the Quenched and Partitioned Steels

Influence of partitioning effects on the retained austenite content and properties of martensitic stainless steel

The dominating role of austenite stability and martensite transformation mechanism on the toughness and ductile-to-brittle-transition temperature of a quenched and partitioned steel

Effect of Heat Treatment Parameters on the Modification of Nano Residual Austenite of Low-Carbon Medium-Chromium Steel

Tailoring the strength and impact toughness of 9Cr1.5Mo1Co steel by optimizing ultra-fine martensite and retained austensite

Effect of carbon content and microstructural refinement on the mechanical property of quenching-partitioning - tempering-treated steels

Effect of Partitioning Treatment on the Mechanical Property of Fe-0.19c-1.47mn-1.50si Steel with Refined Martensitic Microstructure

Effect of Martensite–austenite Constituents on Impact Toughness of Pre-Tempered MnNiMo Bainitic Steel