Abstract:Severe plastic deformation (SPD) techniques such as laser shock peening (LSP) have been widely adopted to modify microstructure of materials. Understanding the plastic deformation mechanisms during SPD will enable the optimization of SPD process to obtain desired microstructures. Using LSP technique, we modified surface microstructure of AISI 420 martensitic stainless steel containing both martensitic lath and carbide, and investigated deformation mechanisms based on microstructural evolution. High-resolution transmission electron microscopy and X-ray diffraction results revealed that the laser shock wave induced severe deformation in the original sub-micron carbide, resulting in carbide fragmentation in AISI 420 martensitic stainless steel. These LSP-induced carbide fragments and original carbides promote nanocrystallization of martensitic laths, because the carbide/matrix interface acts as an effective dislocation nucleation sites and an obstacle to the dislocation movement. The LSP-generated martensitic lath nanocrystallization is rationalized by two simultaneous subdivision modes: the intersection between longitudinal and transverse sub-boundaries developed from dense dislocation walls and transverse sub-boundaries transformed from dislocation tangles. In addition, the carbide decomposition happened simultaneously with severe plastic deformation, which was reflected by the decreasing continuous Cr concentration and the increment of Fe concentration with increasing deformation degree in the deformed carbide. Finally, fine grain strengthening, precipitation strengthening and dislocation strengthening induced by LSP contribute to an increase in the strength and ductility of AISI 420 martensitic stainless steel.

Surface Morphology and Deformation Mechanism of Single Crystal Copper Treated by Laser Shock Peening

Investigation on femtosecond laser shock peening of commercially pure copper without ablative layer and confinement layer in air

Deformation Behavior of Single Crystal Silicon Induced by Laser Shock Peening

Microstructural evolution and mechanical behaviors of Al-Cu-Li alloy processed by laser shock peening

Effects of Residual Stress Induced by Laser Shock Peening on Mixed-Mode Crack Propagation Behavior in 7075-T6 Aluminum Alloy Panel

Microscopic Surface Topography of a Wrought Superalloy Processed by Laser Shock Peening

Improvement of Wear Resistance in Laser Shock-Peened Copper Contacts

The Local Microscale Reverse Deformation of Metallic Material under Laser Shock

Microstructural Evolution, Mechanical Behaviors and Strengthening Mechanism of 300 M Steel Subjected to Multi-Pass Laser Shock Peening

Simulation of the elasto-plastic response and residual stresses near metal surface due to laser shock processing

Recent Progress in Laser Shock Peening: Mechanism, Laser Systems and Development Prospects

A Novel Micro-Scale Plastic Deformation Feature on A Bulk Metallic Glass Surface under Laser Shock Peening

Microstructure and mechanical properties of laser shock peened 38CrSi steel

Numerical investigation on spall fracture in a metallic material caused by laser shock peening

Effect of laser-shock peening on the structure and nano-mechanical behavior of a Ti-based metallic glass

Study of Mechanism of Strengthening Materials with Laser Shock Processing

Carbide-facilitated nanocrystallization of martensitic laths and carbide deformation in AISI 420 stainless steel during laser shock peening

Altering the surface wettability of copper sheet using overlapping laser shock imprinting

Microstructural Evolution and Mechanical Properties of Duplex-Phase Ti6242 Alloy Treated by Laser Shock Peening

Dynamic Response and Residual Stress Fields of Ti6al4v Alloy under Shock Wave Induced by Laser Shock Peening

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening