Abstract:To meet the demands for high-temperature performance and lightweight materials in aerospace engineering, the Au-Ni solder is often utilized for joining dissimilar materials, such as Ti3Al-based alloys and Ni-based high-temperature alloys. However, the interaction between Ti and Ni can lead to the formation of brittle phases, like Ti2Ni, TiNi, and TiNi3, which diminish the mechanical properties of the joint and increase the risk of crack formation during the welding process. Cu doping has been shown to enhance the mechanical properties and high-temperature stability of the Au-Ni brazed joint's central area. Due to the difficulty in accurately controlling the solid solution content of Cu in the Au-Ni alloy, along with the high cost of Au, traditional experimental trial-and-error methods are insufficient for the development of Au-based solders. In this study, first principles calculations based on density functional theory were employed to analyze the effect of Cu content on the stability of the Au-2.0Ni-xCu (x = 0, 0.25, 0.5, 0.75, 1.0, 1.25 wt%) alloy phase structure. The thermal properties of the alloy were determined using Gibbs software fitting. The results indicate that the Au-2.0Ni-0.25Cu alloy exhibits the highest plastic toughness (B/G = 5.601, ν = 0.416, Cauchy pressure = 73.676 GPa) and a hardness of 1.17 GPa, which is 80% higher than that of Au-2.0Ni. This alloy balances excellent strength and plastic toughness, meeting the mechanical performance requirements of brazed joints. The constant pressure specific heat capacity (Cp) of the Au-2.0Ni-xCu alloy is higher than that of Au-2.0Ni and increases with Cu content. At 1000 K, the Cp of the Au-2.0Ni-0.25Cu alloy is 35.606 J·mol−1·K−1, which is 5.88% higher than that of Au-2.0Ni. The higher Cp contributes to enhanced high-temperature stability. Moreover, the linear expansion coefficient (CTE) of the Au-2.0Ni-0.25Cu alloy at 1000 K is 8.76 × 10−5·K−1, only 0.68% higher than Au-2.0Ni. The lower CTE helps to reduce the risk of solder damage caused by thermal stress. Therefore, the Au-2.0Ni-0.25Cu alloy is more suitable for brazing applications in high-temperature environments due to its excellent mechanical properties and thermal stability. This study provides a theoretical basis for the performance optimization and engineering application of the Au-2.0Ni-xCu alloy as a gold-based solder.

Design of Solder Alloy Composition for Semi-Flexible Coaxial Cable Holistic Tin-Plating Application

Lead-tin alloy electroplating applied to superconducting resonator

Improvement of the Solderability of Aluminum Alloy, Nickel, Stainless Steel and Copper by Metallization of Silver and Nickel for Power Semiconductors

Study on the Application of Modified Sn-Based Solder in Cable Intermediate Joints

Study on Softening Resistance of Cu-Sn-Fe-P alloy for Advanced Electrical Connectors

Study of New Types Lead-Free Solder Alloys of Sn-Ag-Cu-Al-Ni and Sn-Zn-Bi-In-P

Effect of Co on microstructure evolution and thermal fatigue stability of lead-free solder alloys of SACBSN series

Effects of High-Temperature Treatment on the Reaction Between Sn-3%Ag-0.5%Cu Solder and Sputtered Ni-V Film on Ferrite Substrate

Synthesis and analysis of the structure of modified-Al2O3 particles used to increase the strength and electrical conductivity of lead-free solder based on Sn–Ag–Cu

The design of low-temperature solder alloys and the comparison of mechanical performance of solder joints on ENIG and ENEPIG interface

Controllable fabrication of Sn–Bi alloy microspheres for improved lead-free solder

Investigation of the mechanical properties of lead-free Sn-58Bi solder alloy with cobalt addition through flux doping

Effect of Cu Content on Performance of Sn-Zn-Cu Lead-Free Solder Alloys Designed by Cluster-Plus-Glue-Atom Model

A review: microstructure and properties of tin-silver-copper lead-free solder series for the applications of electronics

Effects of α-Fe2O3 Additions on Assembly Reliability of Electroplated Sn-Based Solder Cap on Cu Pillar Bump During Thermal Cycling

Solder joint shape optimization and thermal-mechanical reliability improvement for microwave RF coaxial connectors

Finite Element Analysis of SnAgCu(Zn, Co, Fe) Lead-free Solder Joints for Electronic Packaging

Transient Liquid Phase Bonding with Sn-Ag-Co Composite Solder for High-Temperature Applications

Microstructure and morphology of the soldering interface of Sn-2.0Ag-1.5Zn low Ag content lead-free solder ball and different substrates

First Principles Calculation of the Effect of Cu Doping on the Mechanical and Thermodynamic Properties of Au-2.0Ni Solder

Structure and properties of Sn-Cu lead-free solders in electronics packaging