Abstract:Single stage G-M cryocoolers (GMCs) with high cooling capacity at 20-50 K provide significant benefit for the field of high temperature superconductors, however, their working efficiency can still be improved for commercial applications. Numerical simulations can serve as a valuable guide for precise optimization of the GMC because they allow one to study its internal operating characteristics. In this research, a twodimensional, transient model of a single stage GMC with a mechanically driven displacer is built and studied using computational fluid dynamics (CFD) simulation. The modelling method has been tested and experimentally verified. It enables a view of the instantaneous non-uniform flow and temperature distributions inside the GMC. Additionally, the effects of cold end channels on the heat transfer efficiency of the cold heat exchanger while operating at a large cooling power are analyzed. The results show that during certain periods of a cycle, most of the regenerator near the cold end remains at almost the same low temperature with no temperature gradient due to the small heat capacity of the materials compared to that of the helium gas; while most of the pressure drop occurs in the region near the hot end due to the high viscosity of helium-4. For a good cooling performance at low temperatures, the cold end channels should be distributed uniformly to guarantee a uniform flow and temperature distribution in the regenerator; while for a high output cooling power at high temperatures, they should be designed to enhance the heat exchange between the gas and the cold heat exchanger as much as possible. (C) 2017 Elsevier Ltd. All rights reserved.

Process Design of Cryogenic Distribution System for Cfetr Cs Model Coil

Mechanical performance evaluation of the CFETR central solenoid model coil design

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Design and Analysis of the Inlet Valve for the CFETR Torus Cryopump

Progress in the Electromagnetic Optimization of the CFETR CS Coil

Design and construction of a helium cooling experimental loop

Design and Strength Analysis of the Lifting Process for CFETR TF Coil Manufacturing

Cryogenic Distribution System Design for Cryomodules and Cavities Test in HIAF Project

Design and Development of Turn Insulation Automatic Wrapping System for CRAFT TF

A Long-Life, High-Capacity and High-Efficiency Cryogenic System Developed for High-Tc Superconducting Magnet Applications

Design of the Onboard Cryogenic System for High-Temperature Superconducting Maglev Vehicle

Remote cryogenic helium gas circulating cooling system for a 10-Mvar class HTS dynamic synchronous condenser

The Mechanical Performance Analyses of CFETR CSMC Preload Components Under Testing Current

Cryogenic and safety design of the future high field cable test facility at Fermilab

Design of A Cryogenic System for A 20m Direct Current Superconducting Mgb2 and Ybco Power Cable

Magnetic and Cryogenic Design of MICE Coupling Solenoid Magnet System

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

A small scale remote cooling system for a superconducting cyclotron magnet