Abstract:6061 Al alloy is widely used for structural components in the structural, building, aerospace and automobile industry because of their good extrude-ability, high strength and low density. 6061 Al alloy is easily corroded during the corrosive environments containing Cl , which lead to the decreasing of the alloy service life. Therefore, the Al alloy need to adopt surface treatment to improve the corrosion resistance. The chromate passivation was the most effective surface treatment technology of Al alloys in the past. However, Cr(VI) could pollute the environment and harmful to human body. Thus, it is necessary to develop chromium-free films to protect Al alloy. Layered double hydroxides (LDHs) are an environment-friendly and smart material, which could be used for anticorrosion film. The inhibitor can be inserted into the film layer due to its unique anion exchanging capacity. Therefore, the LDHs is acquired self-healing performance and applied to the anticorrosion field of Al alloy. Meanwhile, vanadate is a good inhibitor and it has many forms under different pH conditions. Moreover, different forms of vanadate have different influence on LDHs film. The corrosion resistance of LDHs and its modified form films on Al alloys need deep study. In this work, ZnAI-LDHs films with NO3- were prepared on the suface of 6061 Al alloy via a facile in-situ growth method, and then ZnAl-LDHs-NO3 films were intercalated with the corrosion inhibitor VO4-3 and VO3- to obtain the ZnAI-LDHs-VO4 and ZnAl-LDHs-VO3 films, respectively. The structure, morphology and composition of as-prepared ZnAI-LDHs films were investigated by XRD, fourier infrared spectrometer (FT-IR) and SEM; the corrosion behavior of ZnAI-LDHs films in the 3.5%NaCI (mass fraction) solution were studied by the electrochemical workstation and the 3D microscope. The results show that the plate-like ZnAI-LDHs microcrystals are perpendicular to the substrate and cover almost the entire Al alloy substrate surface. Compared with the 6061 Al substrate, ZnAI-LDHs films can not only decrease the corrosion current (I-corr), but also increase the corrosion potential (E-corr) and charge transfer resistance (R-ct) of the 6061 Al alloy. It is suggested that ZnAI-LDHs films could significantly enhance the corrosion resistance of 6061 Al substrate, indicating an effective protection for 6061 Al alloy by the ZnAI-LDHs film. The ZnAl-LDH-VO3 film is of the highest corrosion resistance in the studied ZnAI-LDHs films.

Fabrication of Inhibitor Anion-Intercalated Layered Double Hydroxide Host Films on Aluminum Alloy 2024 and Their Anticorrosion Properties

Enhanced Protective Zn–Al Layered Double Hydroxide Film Fabricated on Anodized 2198 Aluminum Alloy

A Novel Approach to Fabricate Protective Layered Double Hydroxide Films on the Surface of Anodized Mg‐Al Alloy

Preparation and Corrosion Resistance of the ZnAl-LDHs Film on 6061 Al Alloy Surface

In Situ Formation of Decavanadate-Intercalated Layered Double Hydroxide Films on AA2024 and their Anti-Corrosive Properties when Combined with Hybrid Sol Gel Films

A comparative study and optimization of corrosion resistance of ZnAl layered double hydroxides films intercalated with different anions on AZ31 Mg alloys

Fabrication of oriented layered double hydroxide films by spin coating and their use in corrosion protection

Enhanced Corrosion Protection by Al Surface Immobilization of In-Situ Grown Layered Double Hydroxide Films Co-Intercalated with Inhibitors and Low Surface Energy Species

Effect of different anion intercalations on the corrosion resistance of layered double hydroxides on the surface of LA43M

Fabrication of Superhydrophobic Layered Double Hydroxides Films with Different Metal Cations on Anodized Aluminum 2198 Alloy

Facile Fabrication of ZnAl Layered Double Hydroxide Film Co-Intercalated with Vanadates and Laurates by One-Step Post Modification

Effect of Divalent Metal Ions on Durability and Anticorrosion Performance of Layered Double Hydroxides on Anodized 2A12 Aluminum Alloy

Formation of Layered Double Hydroxides Film on AA2099-T83 Al-Cu-Li Alloy and Its Effect on Corrosion Resistance

Preparation and corrosion behavior of Mg(Li)-M layered double hydroxides films on the surface of magnesium-lithium alloy

Influence of Li+/Al3+ on the Corrosion Behavior of Li-Al Layered Double Hydroxides (ldhs) Film on LA51 Magnesium Alloys

Ni-Al Layered Double Hydroxide Films Offering Corrosion Protection Under Dark Or Illuminated Conditions

Influence of Li + /Al 3+ on the corrosion behavior of Li-Al layered double hydroxides (LDHs) film on LA51 magnesium alloys

Effect of Corrosion Inhibitor Pyrovanadate Ions on Microstructure and Corrosion Resistance of MgAl Layered Double Hydroxide Films on LA43M Mg-Li Alloy

Preparation of superhydrophobic Li–Al-Ala LDH/SA film with enhanced corrosion resistance and mechanical stability on AZ91D Mg alloy

Communication-Fabrication of Protective Layered Double Hydroxide Films by Conversion of Anodic Films on Magnesium Alloy

Fabrication and Characterization of Mg-M Layered Double Hydroxide Films on Anodized Magnesium Alloy AZ31