Abstract:Because of their low density and high specific strength, Mg alloys are considered promising lightweight alloys for various applications. However, due to the high electrochemical activity and poor corrosion resistance, surface modifications of Mg alloys are needed to increase the service life. Hence, an active layered double hydroxides (LDHs) coating was investigated in this study. Owing to the brucite-like layered structure, the weakly bonded interlayer anions can be easily exchanged with other anions in the environment. With the unique anion-exchange mechanism, LDHs coating provides dual protection to the Mg alloy substrate. It can not only act as a physical barrier but also absorb aggressive anions such as Cl - and release corrosion inhibitors to the environment. Compared to the commonly used hydrothermal method to fabricate LDHs coating, which requires high temperature and long process time, electrochemical deposition has the advantages of high deposition rates, simple experimental setup, and highly controllable process parameters. Therefore, in this study, a three-electrode electrochemical setup was used to fabricate Zn-Al LDHs coatings on a ZX21 Mg alloy. Moreover, different anions are intercalated into the interlayer galleries of the prepared Zn-Al LDHs coating through post anion-exchange processes. Through electrochemical analysis in a 3.5 wt% NaCl solution, the prepared anion-exchanged electrodeposited Zn-Al LDHs coating improved the corrosion resistance of ZX21 Mg alloy. Electrochemical impedance spectroscopy (EIS) showed that corrosion impedance increases, while potentiodynamic polarization curves revealed that the corrosion current density ( i corr ) of the coated sample was an order of magnitude lower than the ZX21 Mg alloy substrate. Besides the improvement of corrosion resistance, the formation mechanism of Zn-Al LDHs coating by electrodeposition was also investigated by electrochemical analysis and in situ optical microscopic (OM) observations. The corrosion behavior and microstructure of Zn-Al LDHs coating and the roles played by different intercalated anions will be discussed based on electrochemical analysis and microstructure characterizations. Figure 1

Enhanced Protective Zn–Al Layered Double Hydroxide Film Fabricated on Anodized 2198 Aluminum Alloy

Preparation and Wettability of Zn–Al Layered Double Hydroxide Film Directly Grown on Highly Porous Anodic Alumina Oxide Template

Ni-Al Layered Double Hydroxide Films Offering Corrosion Protection Under Dark Or Illuminated Conditions

Preparation of superhydrophobic Li–Al-Ala LDH/SA film with enhanced corrosion resistance and mechanical stability on AZ91D Mg alloy

Preparation and corrosion behavior of Mg(Li)-M layered double hydroxides films on the surface of magnesium-lithium alloy

In situ growth process and corrosion resistance of a layered double‐hydroxide film on an LA103Z magnesium–lithium alloy

Fabrication of zinc-aluminum layer double hydroxide thin films and their anionic adsorption performance

Influence of Li + /Al 3+ on the corrosion behavior of Li-Al layered double hydroxides (LDHs) film on LA51 magnesium alloys

Effect of ZnAl‐LDH on corrosion resistance of Zn–55Al alloy in NaCl solution

Enhanced Corrosion Resistance of Layered Double Hydroxide Films on Mg Alloy: The Key Role of Cationic Surfactant

In Situ Formation of Decavanadate-Intercalated Layered Double Hydroxide Films on AA2024 and their Anti-Corrosive Properties when Combined with Hybrid Sol Gel Films

Anti-Corrosion Property of Atomic Layer Deposition Films for Anodized Aluminum

Effect of different anion intercalations on the corrosion resistance of layered double hydroxides on the surface of LA43M

Enhanced corrosion protection of magnesium alloy via in situ Mg–Al LDH coating modified by core–shell structured Zn–Al LDH@ZIF-8

A comparative study and optimization of corrosion resistance of Mg–Al layered double hydroxides films at different hydrothermal temperatures on LA103Z Mg–Li alloy

Fabrication of Anion-Exchanged Electrodeposited Zn-Al Layered Double Hydroxides (LDHs) Coating on ZX21 Mg Alloy

Fabrication of Vanadate-Exchanged Electrodeposited Zn-Al Layered Double Hydroxide (LDH) Coating on a ZX21 Mg Alloy to Improve the Corrosion Resistance

Facile Fabrication and Properties of Super-hydrophobic MgAl-LDH Films With Excellent Corrosion Resistance on AZ31 Magnesium Alloy

Comparative Study on Corrosion Resistance of Binary and Ternary Layered Double Hydroxide Films on Magnesium Lithium Alloy

Preparation of one-step organic anion-modified MgAl-LDH films under mild conditions for Mg alloy corrosion protection

A Novel Mg-Al-Co LDH/ MAO Composite Films on LA103Z Magnesium-Lithium Alloy and Its Active Anti-corrosion Performance