Abstract:A novel flow-through electrochemical technology (or termed reactive electrochemical membrane, REM) developed from porous electrode materials has recently attracted increasing attention globally in water purification and environment remediation. REM systems compress the boundary diffusion layer on the surface of the electrode via a combination of the convection of the solution and the constraint effect of the micro-pore structure, thus overcoming the mass transfer limitation in traditional flow-by systems. As a result, the kinetics of contaminant separation and conversion in a REM system increases by several to tens of times as compared with the flow-by systems. However, most existing studies are focused on the development of novel electrode materials, the evaluation of the removal efficiency and mechanism for contaminants, and the optimization of the treatment process of a REM system. In comparison, there is a gap in understanding the working principles of the REM electrodes. In contrast to the traditional flow-by system, the convective transport of the solution in the REM system drives the contaminants to the inside of the REM electrode, which activates the inner catalytic zone thereby. Because the electrode features the characteristics of non-uniform polarization, the given potential decays continuously along the depth of the REM electrode, thus causing a non-uniform distribution of the potential inside the REM electrode. As such, the zero-dimensional reaction theory of the electrode in traditional flow-by system (that is, the reaction mainly occurs on the surface of the electrode and is controlled by the potential) is no longer applicable to REM electrodes. It is therefore vital to revisit the reaction mechanism of the REM electrode. This Presentation therefore discusses the non-uniform polarization characteristics of the REM electrodes that are developed by loading catalytic layer on porous substrates. The main contents include: (1) REM electrode d emonstrates non-uniform oxidation characteristics: The key influencing factors ( i.e. , the pore structure of the REM electrode and the concentration of the electrolyte) and their principles of action to determine the reaction depth of a REM electrode have been identified, by employing (1) a developed mathematical model that could describe the spatial overpotential distribution as a function of depth in the REM electrode and (2) a visualization method to characterize the reactive depth of a REM electrode. (2) There is a structure-function relationship between the REM electrode pore structure and water purification efficiency : A series of SnO 2 -Sb-REMs with pore diameters in a range of 4.7 to 49.4 μm have been prepared to study the influence of the key factor ( i.e. , pore structure) on the transport-oxidation process of typical antibiotics. The REM electrode performance that could not constantly increase with a decrease in the pore diameter relates to the decreasing reactive depth of the electrode at a smaller pore diameter, which would lead to the compromise of the intrinsic kinetics of a REM electrode. (3) Direct electron transfer (DET) dominates the oxidation of antibiotics by using REM developed from porous substrates with a catalytic layer: The mechanism of typical antibiotics removal by employing SnO 2 -Sb-REM, β -PbO 2 -Sb-REM and Ti 4 O 7 -REM has been systematically investigated. The non-uniform oxidation characteristics of the REM electrode resulted in the DET rate being much higher than the yield of the hydroxyl radical ( • OH), which was insignificantly affected by the electrode materials. The strong DET ability enabled the REM system to quickly and efficiently degrade antibiotics, which also imparted the REM system a stronger resistance to the background matrix (such as Cl – , HCO 3 – and natural soluble organic matter).

Highly Porous Ti4O7 Reactive Electrochemical Water Filtration Membranes Fabricated via Electrospinning/Electrospraying

Porous substoichiometric TiO2 anodes as reactive electrochemical membranes for water treatment.

Fabrication of High-Flux PTFE Hollow Fiber Membranes Through Nonionic Surfactant Infiltration Coupled with Mussel-Inspired Chemistry Coating

Fabrication and Characterization of the Porous Ti4O7 Reactive Electrochemical Membrane

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Degradation of 17Β-Estradiol and Antifouling Properties of Magnéli Phase Ti4O7 Reactive Electrochemical Membrane in the Presence of Fulvic Acid

Degradation of 17 β -estradiol and antifouling properties of magnéli phase Ti 4 O 7 reactive electrochemical membrane in the presence of fulvic acid

Electrospun nanofiber membranes incorporating fluorosilane-coated TiO2 nanocomposite for direct contact membrane distillation

Enhanced treatment of p-nitrophenol and coking wastewater through electrochemical and electrochemical-ozonation coupling process utilizing a novel Ti4O7 reactive electrochemical membrane anode

Reactive Electrochemical Ceramic Membrane for Effective Removal of High Concentration Humic Acid: Insights of Different Performance and Mechanisms

Enhanced electrochemical decontamination and water permeation of titanium suboxide reactive electrochemical membrane based on sonoelectrochemistry

Electrochemical Treatment of Municipal Reverse Osmosis Concentrates by a Tio2-Bnts/Sno2-Sb Reactive Electrochemical Membrane

(Invited) Non-Uniformly Polarized Reactive Electrochemical Membrane (REM) for Water Purification

Electrochemical treatment of municipal reverse osmosis concentrates by a TiO 2 -BNTs/SnO 2 -Sb reactive electrochemical membrane

Carbon-based Electrocatalytic Dual-membrane System Bolsters Singlet Oxygen Production for Ultrafast Water Decontamination

Electrochemical oxidation of reverse osmosis concentrate using a pilot-scale reactive electrochemical membrane filtration system: Performance and mechanisms

Electrospun Fibrous Mats As a Skeleton for Fabricating Hierarchically Structured Materials As Sorbents for Cu2+

Scalable Conductive Polymer Membranes for Ultrafast Organic Pollutants Removal

Filtration-enhanced Highly Efficient Photocatalytic Degradation with a Novel Electrospun Rgo@tio2 Nanofibrous Membrane: Implication for Improving Photocatalytic Efficiency

Filtration of Paint-Contaminated Water by Electrospun Membranes

Flexible Metal Membrane Integrated Electrified and Catalytic Attributes for Multifunctional Water Purification with Enhanced Scaling Resistance