Fabrication and Characterization of the Porous Ti4O7 Reactive Electrochemical Membrane

Guangfeng Qi,Xiaohui Wang,Jingang Zhao,Chunyan Song,Yanbo Zhang,Feizhou Ren,Nan Zhang

DOI: https://doi.org/10.3389/fchem.2021.833024

IF: 5.5

2022-02-14

Frontiers in Chemistry

Abstract:Preparation of the Magnéli Ti 4 O 7 reactive electrochemical membrane (REM) with high purity is of great significance for its application in electrochemical advanced oxidation processes (EAOPs) for wastewater treatment. In this study, the Ti 4 O 7 REM with high purity was synthesized by mechanical pressing of TiO 2 powders followed by thermal reduction to Ti 4 O 7 using the Ti powder as the reducing reagent, where the TiO 2 monolith and Ti powder were separated from each other with the distance of about 5 cm in the vacuum furnace. When the temperature was elevated to 1333 K, the Magnéli phase Ti 4 O 7 REM with the Ti 4 O 7 content of 98.5% was obtained after thermal reduction for 4 h. Noticeably, the surface and interior of the obtained REM bulk sample has a homogeneous Ti 4 O 7 content. Doping carbon black (0wt%-15wt%) could increase the porosity of the Ti 4 O 7 REM (38–59%). Accordingly, the internal resistance of the electrode and electrolyte and the charge-transfer impedance increased slightly with the increasing carbon black content. The optimum electroactive surface area (1.1 m 2 ) was obtained at a carbon black content of 5wt%, which increased by 1.3-fold in comparison with that without carbon black. The as-prepared Ti 4 O 7 REMs show high oxygen evolution potential, approximately 2.7 V/SHE, indicating their appreciable electrocatalytic activity toward the production of •OH.

chemistry, multidisciplinary