Abstract:Nuclear energy enables large-scale carbon-free hydrogen production, and the coupling of the very-high-temperature gas-cooled reactor and iodine-sulfur (IS) cycle has the potential to achieve efficient hydrogen production. This study develops the flowsheet of IS process, performs process simulation, designs the internal heat exchange network using pinch point technology, and discusses the thermal efficiency of hydrogen production in detail. The results show that if all heat released by heat exchangers in H2SO4 and HI sections can be fully recovered and utilized, the upper bound of the thermal efficiency of the IS process is 51.9%. The pinch point temperature difference has little impact on the performance of the heat exchange network of the H2SO4 section, but greatly influences the performance of the heat exchange network of the HI section. When the pinch point temperature difference is 5 degrees C to 20 degrees C, the input heat duties required by the H2SO4 and HI sections are reduced by 23.9% to 25.0% and 20.8% to 50.8%, respectively, compared with those without heat exchange networks. After designing the heat exchange network, considering the recovery and utilization of a portion of waste heat, a more realistic hydrogen production efficiency of 30.0% to 37.1% corresponding to the pinch point temperature difference of 5 degrees C to 20 degrees C is given. Highlights Process simulation of IS cycle is conducted to analyze its energy consumption. Internal heat exchange network is designed using pinch point technology. Network performance is studied at different pinch point temperature differences. Thermal efficiency of hydrogen production is discussed in detail.

Thermal efficiency evaluation of a ZnSI thermochemical cycle for CO 2 conversion and H 2 production – Complete system

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Simplification of the zinc-sulfur-iodine thermochemical cycle for the production of H 2 and CO

Thermal efficiency evaluation of the thermochemical H2S splitting cycle for the hydrogen and sulfur production

Thermal Efficiency Evaluation of Open-Loop Si Thermochemical Cycle for the Production of Hydrogen, Sulfuric Acid and Electric Power

Process Design and Simulation of Open-Loop Sulfur-Iodine Thermo-Chemical Cycle for Hydrogen Production

Thermodynamics and kinetics modeling for reactions and thermal efficiency evaluation of open-loop SI thermochemical cycle

Thermochemical Dissociation of Water and Carbon Dioxide Via ZnSI Cycle for Hydrogen and Carbon Monoxide Production

SIMULATION OF HYDROGEN PRODUCTION BY SULFUR-IODINE THERMO-CHEMICAL CYCLE PROCESS

Optimization design and stimulation of hydrogen production by sulfur-iodine thermo-chemical cycle process

Comprehensive Comparative Analysis of Open-Loop and Closed-Loop Iodine-Sulfur Thermochemical Cycle for Hydrogen Production

Analysis of Internal Heat Exchange Network and Hydrogen Production Efficiency of Iodine–sulfur Cycle for Nuclear Hydrogen Production

Occurrence of the Bunsen Side Reaction in the Sulfur-Iodine Thermochemical Cycle for Hydrogen Production

Design of Integrated Laboratory-Scale Iodine Sulfur Hydrogen Production Cycle at Inet

Thermodynamic Analysis of the Efficiency of High Temperature Co-Electrolysis System for Syngas Production

United Conversion Process Coupling Co2 Mineralization With Thermochemical Hydrogen Production

Review of Thermodynamic Properties of the Components in HI Decomposition Section of the Iodine–sulfur Process

Experimental Study on the Catalytic Decomposition of Hydrogen Iodide for SI Thermochemical Cycle

Comparison of Various Circuit Designs in the HI Decomposition Section of the Iodine–sulfur Process

Experimental Study of the Characteristics of HI Distillation in the Thermochemical Iodine–Sulfur Cycle for Hydrogen Production

Thermal efficiency improvement of hydrogen production via thermochemical water splitting