Abstract:The efficient separation and purification of high-purity hydrogen is imperative and desirable. We systematically explored the H 2 purification performance of the T-C 3 N 2 membrane with and without biaxial compressive (BC) strain and charge engineering by using MD simulations and DFT calculations. We found that the pure T-C 3 N 2 membrane has relatively poor H 2 selectivity as CO 2 can also permeate through the membrane, and two modulation methods of BC-strain and charge were thus introduced separately to enhance the H 2 separation performance for the first time. The T-C 3 N 2 membrane with BC-strains modulation (1 %–3%) has excellent H 2 permeance of 1.60 × 10 7 –1.85 × 10 7 GPU at 300 K with 15.6 % enhancement with respect to the pure T-C 3 N 2 membrane. The selectivity of H 2 over gases (CO, N 2 , CO 2 , H 2 O, CH 4 ) was drastically improved, for example, H 2 /CH 4 is enhanced from 5.8 × 10 20 to 2.1 × 10 36 under 3 % strain engineering. The introduction of charge (1e–3e, 1e − –2e − ) also enhances the H 2 permeance of 1.47 × 10 7 –1.68 × 10 7 GPU and the selectivity at 300 K. In particular, the charge (1e) and (1e − ) modulations exhibit a desired permeance-selectivity trade-off for H 2 purification with the enhancement of 5 % permeability and at least 1.3 times selectivity of H 2 to other gases, respectively. Finally, the synergistic effect of BC-strain and charge on the H 2 separation was studied, and it is much superior to separated BC-strain and charge engineering for H 2 purification, where the H 2 permeance enhances up to 1.86 × 10 7 –1.89 × 10 7 GPU, and the H 2 selectivity at 300 K is also enlarged at least ten times compared with that of the most effective modification of the isolated 2 % BC-strain and 1e charge, indicating synergistic effect further enhances the H 2 separation performance. Therefore, the excellent modulations of appropriate BC-strain and charge engineering, particularly for their synergistic effect make the T-C 3 N 2 membrane a promising candidate for highly permeant and selective H 2 separation and purification that would be easily realized experimentally.

Computational Prediction of Experimentally Possible G-C3n3 Monolayer As Hydrogen Purification Membrane

A high selective and permeable C7N6 monolayer membrane for H2 purification: First-principles and molecular dynamics simulations

Heptazine-based graphitic carbon nitride as an effective hydrogen purification membrane

Graphite Phase Carbon Nitride Based Membrane for Selective Permeation

Two-dimensional graphene-like C2N: an experimentally available porous membrane for hydrogen purification.

Graphene Oxide-Modified G-C3n4 Nanosheet Membranes for Efficient Hydrogen Purification

Fast Hydrogen Purification Through Graphitic Carbon Nitride Nanosheet Membranes

Graphenylene-1 Membrane: An Excellent Candidate for Hydrogen Purification and Helium Separation

Theoretical design of an effective He separation membrane based on nanoporous C9N4 monolayer

Superior performance porous carbon nitride nanosheets for helium separation from natural gas: Insights from MD and DFT simulations

Coronoid Nanographene C-216 As Hydrogen Purification Membrane: A Density Functional Theory Study

Highly-efficient hydrogen purification with the T-C 3 N 2 membrane via strain and charge engineering as well as their synergistic effect

Modeling of Light Gases Purification and Carbon Dioxide Capture by 1B-3N and 1N-3B Defects

Computational Evaluation of Li-doped g-C2N Monolayer as Advanced Hydrogen Storage Media

Preparation of continuous NH2–MIL-53 membrane on ammoniated polyvinylidene fluoride hollow fiber for efficient H2 purification

Enhanced Selective Hydrogen Permeation through Graphdiyne Membrane: A Theoretical Study

Theoretical design of a strain-controlled nanoporous CN membrane for helium separation

A new approach to separate hydrogen from carbon dioxide using graphdiyne-like membrane

A review: g-C3N4 as a new membrane material

A mixed electronic and protonic conducting hydrogen separation membrane with asymmetric structure

Screening and design of COF-based mixed-matrix membrane for CH4/N2 separation