Abstract:The copper-cerium composite oxides supported on silicon carbide (SiC) catalysts (CuO-CeO2/SiC) for sulfuric acid decomposition were studied in sulfur-iodine (SI or IS) cycle. The influence of calcination temperatures (800 degrees C-1000 degrees C) of CuO-CeO2/SiC catalysts on their activities and morphology were investigated in this study. The activity of CuO-CeO2/SiC was prominently higher than that of CuO-CeO2 composite oxides catalyst. The SO3 conversion ratio of CuO-CeO2/SiC catalyst increased with calcination temperature from 800 degrees C to 900 degrees C, while decreased with calcination temperature at 900 degrees C-1000 degrees C. XRD pattern, TEM (HRTEM) images and Energy Dispersive X-ray (EDX) spectra revealed that copper-cerium composite oxides were well dispersed and immobilized on the surface of SiC grains. XRD pattern showed that the accelerated transformation of SiC crystals to amorphous SiO2 and the rapid expansion of CeO2 sub-grains at the calcination temperature of 900 degrees C-1000 degrees C, as well as the accelerated amorphization of CuO crystals at 800 degrees C-900 degrees C. The agglomeration of catalysts with sintering temperature was also proven by the BET test. At a higher calcination temperature, X-ray photoelectron spectroscopy (XPS) of Cu-2p spectra revealed the reduction of more Cu2+ in the process of SiC oxidation. According to TEM (HRTEM), XPS, and infrared radiation, the amorphous SiO2 was produced by the oxidation of superficial SiC particles, and the thickness of the SiO2 layers on SiC grains increased with the calcination temperature. A simple mechanism depicted the oxidation of CuO-CeO2/SiC was created. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Catalytic Decomposition of Sulfuric Acid over CuO/CeO2 in the Sulfur–iodine Cycle for Hydrogen Production

SO3 Decomposition over CuO–CeO2 Based Catalysts in the Sulfur–iodine Cycle for Hydrogen Production

Study on Cuo-Ceo2/Sic Catalysts in the Sulfur-Iodine Cycle for Hydrogen Production

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Influence of Calcination Temperature on CuO–CeO2/SiC Catalysts for SO3 Decomposition in the Sulfur–iodine Cycle for Hydrogen Production

Catalytic decomposition of sulfuric acid on composite oxides and Pt/SiC

Detailed Kinetic Modeling of Homogeneous H2SO4 Decomposition in the Sulfur–iodine Cycle for Hydrogen Production

Catalytic Decomposition of Sulfuric Acid over Copper Ferrite in Iodine Sulfur Thermochemical Cycle

Ceria As a Catalyst for Hydrogen Iodide Decomposition in Sulfur–iodine Cycle for Hydrogen Production

Catalytic decomposition of hydrogen iodide over pre-treated Ni/CeO2 catalysts for hydrogen production in the sulfur–iodine cycle

Influence of the oxidative/reductive treatments on Pt/CeO2 catalyst for hydrogen iodide decomposition in sulfur–iodine cycle

Influence of the Chemical Composition of MgAlFeCu Mixed Oxides As Catalysts for SO2Removal

Resource utilization of high-concentration SO2 for sulfur production over La-Ce-Ox composite oxide catalyst

Catalytic thermal decomposition of hydrogen iodide in sulfur-iodine cycle for hydrogen production

Catalytic Performance of Semi-Coke on Hydrogen Iodide Decomposition in Sulfur-Iodine Thermochemical Cycle for Carbon Dioxide-Free Hydrogen Production

Promoting SO2 Resistance of a CeO2(5)-WO3(9)/TiO2 Catalyst for Hg0 Oxidation Via Adjusting the Basicity and Acidity Sites Using a CuO Doping Method

High-Temperature Selective Oxidation of H2S to Elemental Sulfur on a Β-Sic-supported Cerium Catalyst

Stabilizing Cu2+ Ions by Solid Solutions to Promote CO2 Electroreduction to Methane

Study on the High-Performance Catalyst for Sulfuric Acid Decomposition in the IS Cycle

Resource utilization of high concentration SO2 for sulfur production over La–Ce-O @ZrO2 composite oxide catalyst

A Comparative Investigation of So2 Oxidative Transfer over Cuo with A Ceo2 Surface