Abstract:The health monitoring of bridge under moving vehicles demands a high-efficient time-varying characteristic analysis method to extract the frequency fluctuations caused by vehicle-bridge dynamic interaction effect. Characteristics identification of structures becomes a challenging task especially when time-varying vibration modes are involved. For this purpose, an instantaneous frequency identification technique based on modified S-transform reassignment is presented in this paper. Firstly, the general approximation between structural instantaneous frequency and S-transform is deduced. The Gaussian window is employed in S-transform and a novel first-order frequency function with two parameters is added into the Gaussian window function to improve the time–frequency resolution. The added function makes the Gaussian window scalable-sliding and the optimal values of the parameters are selected based on time–frequency concentration criterion. Considering the Rényi entropy as the measurement of criterion, the information performance extracted from S-transform spectrogram is evaluated. Then the time–frequency reassignment technique is applied to improve the readability of S-transform spectrogram to assure the accuracy of the extracted instantaneous characteristics, which enhances the time–frequency concentration efficiently. The proposed method is verified by numerical simulation, the results obtained by the spectrograms derived from short-time Fourier transform, wavelet transform, modified S-transform and reassigned modified S-transform are compared. Afterwards, the time-varying frequency components related to the vehicle-bridge interaction are extracted from the response signal. Numerical simulations involving different parameter analysis and laboratory experiments are conducted to validate the flexibility of the technique in vehicle-bridge system. The effect of vehicle weight, speed and road surface roughness on the identified results are discussed. Both numerical and experimental results have demonstrated that a higher time–frequency concentration in the spectrogram can be observed of the proposed modified S-transform reassignment method than other time–frequency methods, and subsequently a higher accuracy of instantaneous frequency identification is achieved which provides a good tool for time-varying characteristic analysis in bridge health monitoring.

Using two connected vehicles to measure the frequencies of bridges with rough surface: a theoretical study

A Numerical Method for Analyzing the Low-Frequency Noise of Bridge under Vehicle Load

Theoretical analysis of low-frequency noise radiated from bridge vibrations

Subspace Identification of Bridge Frequencies Based on the Dimensionless Response of a Two-Axle Vehicle

Damage Identification in Warren Truss Bridges by Two Different Time–Frequency Algorithms

Estimating Bridge Natural Frequencies Based on Modal Analysis of Vehicle–Bridge Synchronized Vibration Data

Bridge Profile and Vehicle Property Determination Using Vehicle Fleet Monitoring Concept

Automated mobile vibration measurement and signal analysis for bridge scour prevention and warning

Smartphone-based Bridge Frequency Identification Using Vehicle Contact-Point Response

Simultaneous identification of the frequencies and track irregularities of high-speed railway bridges from vehicle vibration data

Bridge Modal Identification using Acceleration Measurements within Moving Vehicles

Bayesian Vehicle Load Estimation, Vehicle Position Tracking, and Structural Identification for Bridges with Strain Measurement

Using vehicle–bridge contact spectra and residue to scan bridge's modal properties with vehicle frequencies and road roughness eliminated

Time-varying characteristics analysis of vehicle-bridge interaction system based on modified S-transform reassignment technique

Frequency Identification of Equal-Span Continuous Girder Bridge Based on Moving Vehicle Responses

Furthering extraction of torsional–flexural frequencies for thin-wall beams from the rocking motion of a two-wheel test vehicle

Modal Frequency Shifts Measured on Xinjiang Bridge Excited by Traveling Vehicles

Scanning torsional-flexural frequencies of thin-walled box girders with rough surface from vehicles’ residual contact response: Theoretical study

Fundamental mode shape estimation and element stiffness evaluation of girder bridges by using passing tractor-trailers

Mode Shape Identification and Damage Detection of Bridge by Movable Sensory System