Abstract:The high temperature tensile test of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy was carried out by electronic universal testing machine under the condition of 750–900 °C/10 −5 –10 −3 s −1 . The hot tensile stress-strain curves were analyzed, and the constitutive model under hot tensile conditions was established. The microstructure transformation rule and deformation mechanism during tensile process were determined. The results show that the hot tensile curve is longer in the steady-state flow stage corresponding to lower strain rate and higher tensile temperature, the true stress declines and the elongation at break increases. The constitutive equation was established based on the tensile curve data, and the corresponding thermal activation energy was 310.3 kJ/mol. As the rise of tensile temperature and the decline of strain rate, the proportion about cross-layer fracture in the tensile fracture morphology decreases, the number of dimples increases, more lamellar structures change into recrystallized structures, and the softening effect of the alloy is more obvious. The dislocation deformation mechanism mainly includes the existence of dislocation slip and climb, dislocation intersection and dislocation ring or dislocation network formation. Twinning deformation is also another important mechanism of high temperature tensile deformation of TiAl alloy. Twins are formed in parallel with each other, so that the deformation can be further carried out. The dislocations and twins in the deformed microstructure will provide nucleation conditions for recrystallized grains. The dynamic recrystallization(DRX) grains are preferentially formed around the grain boundary and the vicinity of dislocation and twin is also preferred nucleation site for DRX. The DRX behavior is the main softening mechanism, and DRX size and volume fraction corresponding to lower tensile rate and higher tensile temperature are larger.

Molecular Dynamics Simulation of Nanocrystal Formation and Deformation Behavior of Ti3al Alloy

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Unexpected Dynamic Recrystallization Behavior of Ti-7Cu Alloy in Semi-Solid State

Evolution of dislocation and twin structures in Ti3Al during solidification

Molecular dynamics simulation on the deformation mechanism of monocrystalline and nano-twinned TiN under nanoindentation

Unraveling hot deformation behavior and microstructure evolution of nanolamellar TiAl/Ti3Al composites

Nanoindentation simulation study on mechanical properties and microstructure evolution of twin γ-TiAl alloy

Molecular Dynamics Simulation of Tensile Mechanical Properties of Ni/Ni<sub>3</sub>Al

Dynamic behavior and fracture mode of TiAl intermetallics with different microstructures at elevated temperatures

Molecular dynamics simulation and experimental study on nanoindentation response of polycrystalline γ-TiAl alloy

Microstructure Evolution of Near Gamma TiAl Intermetallic under Tensile Impact Loadings at High Temperatures

Experiments and crystal plasticity simulations for the deformation behavior of nanoindentation: Application to the α2 phase of TiAl alloy

Atomistic Simulations of Superplasticity and Amorphization of Nanocrystalline Anatase TiO2

Dislocation formation and twinning from the crack tip in Ni_3Al:molecular dynamics simulations

Metastable liquid properties and rapid crystal growth of Ti-Ni-Al alloy investigated by electrostatic levitation and molecular dynamics simulation

Dislocation formation and twinning from the crack tip in Ni 3 Al: molecular dynamics simulations

Hall–Petch relationship in Ti3Al nano-polycrystalline alloys by molecular dynamics simulation

Microstructure evolvement of isometry TiAl under tensile impact loadings

Studying Plastic Deformation Mechanism in β-Ti-Nb Alloys by Molecular Dynamic Simulations

An interatomic potential for accurately describing the atomic-scale deformation behaviors of Ti2AlC crystal

Study on high temperature tensile constitutive behavior and deformation mechanism of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy