Abstract:Nanoparticles (NPs) have had increasingly successful applications including in emissive or photovoltaic devices; however, trap states associated with the surface of NPs often drastically reduce the efficiency of devices and are difficult to detect spectroscopically. We show the applicability of photoconduction as the means of detecting and quantifying trap states in NPs. We performed time-of-flight (ToF) photoconduction measurements, using semiconducting poly[bis(4-phenyl)(4-butyphenyl)amine] (P-TPD) doped with either core/shell CdSeS/CdS quantum dots (QDs) or perovskite CsPbBr3 NPs, both of which are carefully designed to be energetically matched. In the case of the QDs, a drop in the hole mobility from ∼10-3 to ∼10-4 cm2 V-1 s-1 was observed when compared to a control sample, suggesting the presence of a hole trapping. These trap states were found to be around -5.0 to -4.9 eV from the vacuum level. The presence of the trap states was further supported by a coincident reduction in the photoluminescence (PL), quantum yield (QY), and lifetime of the core/shell QDs after purification. Using the measured reductions in the PL, QY, and lifetime, the surface trap state density was estimated to increase by between 20 and 40%, most likely due to a ligand detachment. In the case of the perovskite NP-doped samples, a mobility of ∼10-3 cm2 V-1 s-1 was measured. Thus, doping with perovskite NPs did not generate any obvious hole trapping from the P-TPD matrix. The absence of a trapping may be related to the reduced surface-to-volume ratio and NP number density of the perovskite NPs compared to the core/shell QDs, since the perovskite NPs are approximately 10 times larger in radius than that of the core/shell QDs. Our results suggest that to minimize the presence of trap states with a view to improving device performance, large-size perovskite NPs appear to be better than small-size QDs.

Trap Engineering of CdTe Nanoparticle for High Gain, Fast Response, and Low Noise P3HT:CdTe Nanocomposite Photodetectors

Synergistic Effect of Hybrid CdSe Nanobelt/PbI2 Flake Heterojunction Toward Drastic Performance Flexible Photodetectors.

High-Performance 1D CdS/2D Te Heterojunction Photodetector

Fast Response CdS-CdSxTe1-x-CdTe Core-Shell Nanobelt Photodetector

Fast-Response Photodetector Based on Hybrid Bi2Te3/PbS Colloidal Quantum Dots

Trap-Assisted Tunneling in PbS Colloidal Quantum Dots Photodetector

Improving the Sensitivity of a Near-Infrared Nanocomposite Photodetector by Enhancing Trap Induced Hole Injection

Synergetic Enhancement of CsPbI3 Nanorods-based High-Performance Photodetectors via PbSe Quantum Dot Interface Engineering

Energetics of Nonradiative Surface Trap States in Nanoparticles Monitored by Time-of-Flight Photoconduction Measurements on Nanoparticle-Polymer Blends

Significant Enhancement of Single-Walled Carbon Nanotube Based Infrared Photodetector Using PbS Quantum Dots

All‐Inorganic CsPbBr 3 Perovskite Nanocrystals/2D Non‐Layered Cadmium Sulfide Selenide for High‐Performance Photodetectors by Energy Band Alignment Engineering

Highly efficient 1D p-Te/2D n-Bi2Te3 heterojunction self-driven broadband photodetector

Fabrication of lead telluride quantum dots and their application in photoelectrochemical-type photodetectors

Field-effect transistor-based solution-processed colloidal quantum dot photodetector with broad bandwidth into near-infrared region

A Highly Sensitive Narrowband Nanocomposite Photodetector with Gain

Significant performance enhancement of UV-Vis self-powered CsPbBr3 quantum dot-based photodetectors induced by ligand modification and P3HT embedding.

Large Photomultiplication by Charge-Self-Trapping for High-Response Quantum Dot Infrared Photodetectors

High performance hybrid MXene nanosheet/CsPbBr3 quantum dot photodetectors with an excellent stability

Self-assembled Te nanowire thin film/silicon heterostructure for cost-effective and fast photoresponse in near-infrared photodetector

High Quantum Efficiency and Broadband Photodetector Based on Graphene/Silicon Nanometer Truncated Cone Arrays

Solution-Processed P3HT:PbS-Based NIR Photodetector With FET Configuration