Abstract:Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser process parameters, including laser power density and scanning rate. Adjusting the parameters to input the appropriate heat, so that the high quality graphene can be obtained in an optimal condition. The influence of carbon source on graphene growth was also investigated. Ultimately, the penetration and precipitation mechanism of carbon into Ni substrate during the fabrication process were also discussed. This approach may reach the scale large enough for practical applications.Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser ...

Direct Top‐Down Fabrication of Large‐Area Graphene Arrays by an In Situ Etching Method

Graphene Arrays: Direct Top‐Down Fabrication of Large‐Area Graphene Arrays by an in Situ Etching Method (adv. Mater. 28/2015)

Large‐Area Growth of Five‐Lobed and Triangular Graphene Grains on Textured Cu Substrate

Direct Laser Fabrication of Large-Area Graphene: an Engineering Approach to Nano-Materials

Nanomanufacturing of Graphene Nanosheets Through Nano-Hole Opening and Closing

Laser Direct Writing of Graphene Nanostructures Beyond the Diffraction Limit by Graphene Oxidation

Bottom-Up Fabrication Of Graphene Nanostructures On Ru (10(1)Over-Bar0)

Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils

Reliable Fabrication of Graphene Nanostructure Based on e-Beam Irradiation of PMMA/Copper Composite Structure

Graphene microtubings: controlled fabrication and site-specific functionalization.

Graphene edge lithography.

Study of Fabricating Functional Nanostructure Through Combined with Molecular Assembly

Direct Writing of Graphene Patterns on Insulating Substrates under Ambient Conditions.

Surface Engineering of Copper Foils for Growing Centimeter-Sized Single-Crystalline Graphene.

Growth and Etching of Centimeter-Scale Self-Assembly Graphene–h-BN Super-Ordered Arrays: Implications for Integrated Electronic Devices

Graphene-enabled and directed nanomaterial placement from solution for large-scale device integration

Graphene: Near‐Equilibrium Chemical Vapor Deposition of High‐Quality Single‐Crystal Graphene Directly on Various Dielectric Substrates (adv. Mater. 9/2014)

Large-scale fabrication of graphene-based electronic and MEMS devices

Bottom‐Up‐Etching‐Mediated Synthesis of Large‐Scale Pure Monolayer Graphene on Cyclic‐Polishing‐Annealed Cu(111) (Adv. Mater. 8/2022)

Single Crystals: Clean Transfer of Large Graphene Single Crystals for High‐Intactness Suspended Membranes and Liquid Cells (adv. Mater. 26/2017)

Towards scalable nano-engineering of graphene