Abstract:The phase separation structure evolution process, i.e. confinement and broke out phenomenon in crystallization/crystallization poly (3-hexylthiophene) (P3HT) and poly [[N, N-bis(2-octyldodecyl)-napthalene- 1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5, 5'-(2,2'-bithiophene)] (N2200) blends were controlled by the polymer solution aggregation behavior and relative crystallization degree of each component. In this study, two different molecular weight of P3HT, M-w = 6 kDa and M-w = 55 kDa were selected and blend with N2200 as the model systems. Different molecular weight of P3HT had different crystalline ability in blend films. A similar phase separation of both two polymer blends could form in good solvent chloroform (CF). Marginal solvents and thermal annealing were employed to change the polymer solution aggregation behavior and relative crystallization degree of the two components. On one hand, when p-xylene (pX) was added as the co-solvent to increase the aggregation of P3HT molecules, for P3HT (Mw = 6 kDa)/N2200, the P3HT phase broke the restriction of N2200 phase while there was almost unchanged in P3HT (Mw = 55 kDa)/N2200. On the other hand, during thermal annealing, the P3HT molecule had a stronger molecular moving ability in P3HT (Mw = 6 kDa)/N2200 than that in P3HT (Mw = 55 kDa)/N2200 (the relative crystallization degree of these two polymers in P3HT (Mw = 6 kDa)/N2200 and P3HT (Mw = 55 kDa)/N2200 are 142 and 3, respectively). The pristine phase separation of P3HT (Mw = 6 kDa)/N2200 was destroyed effectively due to the unmatched crystallization degree of the two components and large sized fibrous phase separation was formed during thermal annealing. However, the pristine phase separation was almost unchanged in P3HT (Mw = 55 kDa)/N2200, and the P3HT molecule could partly ordered arrangement, which probably come from the almost matched crystallization degree of these two polymers. The results indicate that it is the Gibbs free energy that controls the phase separation in different relative crystallization degree. And different chain entanglements behavior was likely to be the main source of the morphological stability. (C) 2018 Elsevier Ltd. All rights reserved.

Subtle Balance Between Length Scale of Phase Separation and Domain Purification in Small‐Molecule Bulk‐Heterojunction Blends under Solvent Vapor Treatment

New Insight of Molecular Interaction, Crystallization and Phase Separation in Higher Performance Small Molecular Solar Cells Via Solvent Vapor Annealing

Solvent-Induced Morphology of the Binary Mixture of Diblock Copolymer in Thin Film: the Block Length and Composition Dependence of Morphology

Effect of the Nature of Annealing Solvent on the Morphology of Diblock Copolymer Blend Thin Films

Vertical phase segregation of hybrid poly(3-hexylthiophene) and fullerene derivative composites controlled via velocity of solvent drying

Solvent-Induced Microphase Separation In Diblock Copolymer Thin Films With Reversibly Switchable Morphology

Solvent Annealing Effects in Dithieno[3,2-b:2′,3′-d]pyrrole–5,6-Difluorobenzo[c][1,2,5]thiadiazole Small Molecule Donors for Bulk-Heterojunction Solar Cells

Mixed Solvent as a Critical Factor in Optimizing Phase Separation of All Small Molecule Organic Solar Cells

Morphology control for polymer solar cells via nonthermal annealing approach

From Binary to Ternary Solvent: Morphology Fine-Tuning of D/A Blends in PDPP3T-based Polymer Solar Cells.

Side chain engineering on a small molecular semiconductor: Balance between solubility and performance by choosing proper positions for alkyl side chains

A Bi-Continuous Network Structure of P-Dts(Fbtth2)(2)/Ep-Pdi Via Selective Solvent Vapor Annealing

Investigating the Effect of Cosolvents on P3HT/O-IDTBR Film-Forming Kinetics and Film Morphology

Defect Removal by Solvent Vapor Annealing in Thin Films of Lamellar Diblock Copolymers

Precisely Control the Morphology and Crystallization of Temperature-Dependent Aggregation Bulk Heterojunction by Using Co-Solvent System for Optimized Light Intensity Distribution and Its Effect on Thick Active Layer Polymer Solar Cells

Separating Crystallization Process of P3HT and O‐IDTBR to Construct Highly Crystalline Interpenetrating Network with Optimized Vertical Phase Separation

Effects of Solvent Vapour Annealing on the Performances of Benzo[1,2-B:4,5-B′]dithiophene and 4,7-Di(4-hexyl-thiophen-2-yl)-5,6-difluorine-2,1,3-benzothiadiazole-based Alternating Polymer Solar Cells with Different Configurations

The Broken out and Confinement Phase Separation Structure Evolution with the Solution Aggregation and Relative Crystallization Degree in P3HT/N2200

Solvent Effect on the Surface Morphology of SEBS/PMMA Blend Films

Modulation of Phase Separation Morphology by Configuration Engineering in Bulk Heterojunction Organic Solar Cells

Morphology and Efficiency Enhancements of PTB7-Th:ITIC Nonfullerene Organic Solar Cells Processed Via Solvent Vapor Annealing