Abstract:The development of fast-charging Li-ion batteries is one of the important steps in building electric vehicles that need high power and fast charging. The reduction in the particle size to the nanometre length scale drastically improves the charging rate by increasing the surface area but lowers the volumetric energy density and can potentially result in more rapid degradation of the electrolyte via electrode-catalysed reactions. Recent reports show that niobium tungsten oxides (NbWOs) with μm sized particles serve as good anode materials for Li-ion batteries having high volumetric capacity with good cyclability at high rates while avoiding solid electrolyte interphase formation (SEI). The high rate performance of NbWOs is attributed to the topochemical charge storage mechanism that exhibits (i) minimal, highly reversible structural changes during the charge-discharge cycles, (ii) high Li-ion diffusion coefficients due to the presence of fast conducting tunnels, and (iii) high electronic conductivity upon lithiation. 1,2 The NbWOs are known to crystallize into two families of different crystal structures depending on the composition and synthesis conditions. The NbWOs phases can either have tungsten bronze-type structures or block-type structures (commonly referred to as Wadsley-Roth phases). Different NbWO phases are reported in the literature 3 which could serve as potential anode materials with better performance. In this work, a series of new NbWO phases have been synthesized at reduced annealing temperatures and the structure of these phases has been established using X-ray and neutron diffraction data. The electrochemical properties of NbWO/Li half cells were examined through a series of galvanostatic (dis)charge tests at varying current rates ranging from 0.2 C to 20 C. The NbWO phases delivers a high reversible capacity of 200 and 130 mAh/g at 0.2C and 10 C respectively vs. Li metal. Here we use operando powder X-ray diffraction to investigate the structural changes occurring at the anode during the charge-discharge process in the newly synthesised NbWO phases. Reference s : 1 K. J. Griffith, K. M. Wiaderek, G. Cibin, L. E. Marbella and C. P. Grey, Nature , 2018, 559 , 556–563. 2 C. P. Koçer, K. J. Griffith, C. P. Grey and A. J. Morris, Chem. Mater. , 2020, 32 , 3980–3989. 3 N. C. Stephenson, Acta Crystallogr. Sect. B Struct. Crystallogr. Cryst. Chem. , 1968, 24 , 637–653. Figure 1

Anode material NbO for Li-ion battery and its electrochemical properties

Nb-Based Oxides As Anode Materials For Lithium Ion Batteries

Conductive Nb25O62 and Nb12O29 Anode Materials for Use in High-Performance Lithium-Ion Storage

Novel Nb26Mo4O77 rod-like nanoparticles anode with enhanced electrochemical performances for lithium-ion batteries

Low Temperature Niobium Tungsten Oxides as Anodes for Fast Charging Li-Ion Batteries

Nanoscale Phase Engineering in Two-Dimensional Niobium Pentoxide Anodes toward Excellent Electrochemical Lithium Storage

Orthorhombic Nb2O5-x for Durable High-Rate Anode of Li-Ion Batteries.

Cubic Niobium Nitride Nanomaterials as Anode Materiasl in Lithium Ion Rechargeable Battery: Synthesis and Property

Facile Formation of Tetragonal-Nb2o5 Microspheres for High-Rate and Stable Lithium Storage with High Areal Capacity.

Modelling and Experimental Investigation of Nb2O5 As a High-Rate Battery Anode Material

Facile synthesis of Nb2O5 nanobelts assembled from nanorods and their applications in lithium ion batteries

Electrospinning In0.5Nb24.5O62 nanofibers as a novel anode host with superior lithium storage performance

Ionic liquid-induced ultrathin and uniform N-doped carbon-wrapped T-Nb2O5 microsphere anode for high-performance lithium-ion battery

NbO2 a Highly Stable, Ultrafast Anode Material for Li- and Na-Ion Batteries

Effects of Nb substitution on structure and electrochemical properties of LiNi0.7Mn0.3O2 cathode materials

Highly stable free‐standing cobalt niobate with orthorhombic structure as anode material for Li‐ion batteries

Box-Implanted Nb2o5 Nanorods As Superior Anode Materials in Lithium Ion Batteries

Effect of Nb5+ Doping and LiNbO3 Coating on the Structure and Surface of a LiNi0.8Mn0.2O2 Cathode Material for Lithium-Ion Batteries

Facile construction of single-crystalline sodium niobate anode materials: insight into the relationship of the morphology and excellent performance for lithium-ion batteries

Inhibition of Phase Transition in Amorphous Niobium Oxide by Covalent Carbon Reinforcement Enables Fast‐Charge and Long‐Duration Lithium Storage

Preparation of Zn3Nb2O8 anode material for high-performance lithium/sodium-ion batteries