Abstract:In this paper, the internal friction behaviour of Zr-Ti-Cu-Ni-Be bulk metallic glass (BMG) containing 2 at% Fe at elevated temperatures has been studied in isothermal dynamic mechanical analysis experiments. The experiments lead to the determination of metastable equilibrium internal friction Q(e)(-1), as a function of temperature, which can be well described by the Maxwell model with viscosity eta(T), following a Vogel-Fulcher-Tammann (VFT) relation or Arrehnius law. Comparison with the Zr-Ti-Cu-Ni-Be glass-forming liquid shows that a small addition of Fe results in a stronger liquid behaviour of the alloy, exhibiting a higher strength parameter as well as lower VFT temperature and therefore correlates better glass forming ability and thermal stability. From the isothermal internal friction data, the activation energies for viscous flow and primary crystallization of the Zr based supercooled metallic liquid are also derived. It is found that the former is comparable to the activation energy controlling the diffusion process of atoms, e. g. the Ni element of medium size and higher mobility among the components of this alloy, while the latter to that of atoms, e. g. the Ti element of larger size and lower mobility. Thus, it is proposed that both isothermal viscous flow and primary crystallization of the alloy in the supercooleld liquid region are atom diffusion-controlled processes. However, the dominating atomic species are different from each other in the multicomponent Zr based BMG.

A Further Study on the New Internal-Friction Peak of the Metallic-Glass Pd77.5cu6si16.5 Near Tg

A New Type of Internal Friction Peak of Metallic Glasses Near Tg

Physical Aging Effect on the Internal Friction of the Glassy Alloy Pd77.5Cu6Si16.5

PHYSICAL AGING EFFECT ON THE INTERNAL-FRICTION OF THE GLASSY ALLOY PD77.5CU6SI16.5

Internal Friction of Metallic Glass Ni74P16B6Al4 Near Tx

Study of internal friction behavior in a Zr base bulk amorphous alloy around the glass transition

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Crystallization study of amorphous Pd43Ni10Cu27P20 alloy by internal friction measurement

Structural Behavior of Pd40Cu30Ni10P20 Bulk Metallic Glass below and above the Glass Transition

Isothermal internal friction behaviour of a Zr based bulk metallic glass with large supercooled liquid region

Investigation on Structural Instability Induced Relaxation and Crystallization in ZrCuAlNi Bulk Metallic Glass

Preparation and Thermal Stability of Pd_(77.5)Cu_6Si_(16.5) Bulk Metallic Glass

Unusual Internal Friction and Its Size Dependence in Nanoscale Metallic Glasses

INTERNAL FRICTION MEASUREMENT OF LOW- TEMPERATURE PHASE TRANSITIONS IN PZT CERAMICS

Thermal Stability and Mechanical Properties of Zr50Ti5Cu18Ni17Al10 Bulk Metallic Glass

Intermediate Temperature Brittleness in Metallic Glasses

Mechanical Relaxation and Freezing in the Room Temperature Strain Glass Alloy Ti50(Pd40Cr10)

Low-Frequency Internal Friction Study on the Structural Changes in Polymer Melts

A STUDY OF INTERNAL FRICTION ASSOCIATED WITH THE MARTENSITE TRANSFORMATION AT LOW FREQUENCY

Critical behavior of the fluctuation heat capacity near the glass transition of metallic glasses

Non-isothermal crystallization kinetics and glass-forming ability of Ti 41 Zr 25 Be 28 Fe 6 bulk metallic glass investigated by differential scanning calorimetry