Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Thermal Degradation of Epoxy Resin Grafted with Polyurethane

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Evaluation of Activation Energy of Epoxy Resin Grafted with Polyurethane Using Modified Non-Linear Integral Isoconversional Method

Model-Fitting and Model-Free Nonisothermal Curing Kinetics of Epoxy Resin with A Low-Volatile Five-Armed Starlike Aliphatic Polyamine

Thermal Degradation Kineties of Epoxy Resin-Polyurethane Interpenetrating Polymer Network Nanocomposites

Kinetics Study of Thermal Decomposition of Epoxy Resins Containing Flame Retardant Components

Microstructure of Epoxy Resin Grafted by Polyurethane

Preparation and Characterization of Graft Copolymer EVA-g-PU

Preparation, flame retardancy, and thermal degradation of epoxy thermosets modified with phosphorous/nitrogen-containing glycidyl derivative

Properties and Morphology of Interpenetrating Polymer Networks Based on Poly(urethane-Imide) and Epoxy Resin

Research on High Heat-Resistance of Epoxy Resin Hybrid System

Novel Thermosetting Resins Based on 4-(N-maleimido)phenylglycidylether

Mechanism Identification and Kinetics Analysis of Thermal Degradation for Carbon Fiber/Epoxy Resin

Study on Properties of Waterborne Polyurethane Acrylate Modified Epoxy Acrylate Resin

THE THERMAL DEGRADATION OF POLYURETHANE

Study of the Degradation of an Epoxy/Amine Resin, 1

Thermal and Dynamic Mechanical Properties of Epoxy Resin/poly(urethane‐imide)/polyhedral Oligomeric Silsesquioxane Nanocomposites

Water Absorption and Property Evolution of Epoxy Resin under Hygrothermal Environment

Kinetics and Mechanism of Thermal Oxidative Degradation of UV Cured Epoxy Acrylate/phosphate Triacrylate Blends

[Study of FTIR spectra and thermal analysis of polyurethane].