Abstract:A series of MnCo/Cu-ZSM-5 (MnCo/Cu-Z) catalysts with different Mn/Co ratios for the selective catalytic reduction (SCR) of NO with NH3 were prepared by the combination of ion exchange and impregnation. The physicochemical properties of the catalysts were investigated by N2 adsorption/desorption, X-ray diffraction (XRD), temperature-programmed reduction with hydrogen (H2-TPR), X-ray photoelectron spectroscopy (XPS), and temperature-programmed desorption of NOx (NOx-TPD) and NH3 (NH3-TPD), and the diffuse reflectance infrared Fourier transform (DRIFT) technique was employed for the detection of intermediate species and the study of the mechanism. The introduction of Mn and Co boosts the catalytic activity of the Cu-Z catalyst at a temperature below 200 °C, and the optimum activity was obtained over the Mn1Co2/Cu-Z catalyst. The enrichment of the high-valent metal ion on the catalyst surface and the improvement in the reducibility of metal oxide are responsible for the elevation in the catalytic activity of MnCo/Cu-Z. The bridged and bidentate modes are the prevailing nitrate species on the Cu-Z and MnCo/Z catalysts, respectively, and both of them were detected over the MnCo/Cu-Z catalyst. Furthermore, the DRIFT spectroscopy (DRIFTS) results indicate that, at 150 °C, the bridged nitrate can react with the adsorbed ammonia species, but the bidentate nitrate fails to do. The SCR reaction over the Cu-Z catalyst follows the Eley–Rideal and Langmuir–Hinshelwood mechanisms simultaneously at 150 °C, whereas an overwhelming dominance of the Eley–Rideal mechanism is identified for the MnCo/Z catalyst. As to the SCR mechanism on the MnCo/Cu-Z catalyst, it combines the features of Cu/Z and Mn1Co2/Z.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.1c01172?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.1c01172</a>.Physical properties of catalysts; peak positions and assignments in the DRIFT Spectra; effects of H2O on NOx conversion; effects of H2O on the stability of catalysts; EDS element mapping of catalysts; and relative amount of surface acid sites (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.1c01172/suppl_file/cs1c01172_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Catalytic Performance and in Situ Surface Chemistry of Pure Α-Mno2 Nanorods in Selective Reduction of NO and N2O with CO

NO Reduction with CO over a Highly Dispersed Mn/TiO2catalyst at Low Temperature: a Combined Experimental and Theoretical Study.

NO reduction with CO over a highly dispersed Mn/TiO 2 catalyst at low temperature: a combined experimental and theoretical study

Catalytic Reduction of NO with NH 3 over V 2 O 5 -MnO X /TiO 2 -Carbon Nanotube Composites

Peanut-Shaped Cu–Mn Nano-Hollow Spinel with Oxygen Vacancies as Catalysts for Low-Temperature NO Reduction by CO

Combination of Experimental and Theoretical Investigations of Mnox/Ce0.9zr0.1o2 Nanorods for Selective Catalytic Reduction of No with Ammonia

Catalytic Performance and Reaction Mechanism of NO Oxidation over Co3O4 Catalysts

Experimental and Theoretical Investigation of Mesoporous MnO2 Nanosheets with Oxygen Vacancies for High-Efficiency Catalytic DeNO(x)

Morphological Effects of Manganese Dioxide on Catalytic Reactions for Low-Temperature Nh3-Scr

Catalytic Reduction of NOx with NH3 over Different-Shaped MnO2 at Low Temperature

Manganese Oxide Nanorod Catalysts for Low-Temperature Selective Catalytic Reduction of NO with NH3

Structure–performance relationships of MnO2 nanocatalyst for the low-temperature SCR removal of NOX under ammonia

Surface Tailoring on Bifunctional CuOx/MnO2 Catalyst to Promote the Selective Catalytic Reduction of NO with NH3 and Oxidation of CO with O2

Manganese Oxides Supported on Multi-Walled Carbon Nanotubes for Selective Catalytic Reduction of NO with NH3: Catalytic Activity and Characterization

In situ synthesis of low-valence MnO/Mn 3 O 4 catalyst via carbon-acid hydrothermal strategy for NO removal

Interactions between CO oxidation and selective catalytic reduction of NO with NH3 over Mn-based catalysts

Mn-Based Catalysts in the Selective Reduction of NOx with CO: Current Status, Existing Challenges, and Future Perspectives

Cu-ZSM-5 Catalyst Impregnated with Mn–Co Oxide for the Selected Catalytic Reduction of NO: Physicochemical Property–Catalytic Activity Relationship and In Situ DRIFTS Study for the Reaction Mechanism

MnO2 nanoarray with oxygen vacancies: An efficient catalyst for NO electroreduction to NH3 at ambient conditions

NiyCo1-yMn2Ox Microspheres for the Selective Catalytic Reduction of NOx with NH3: the Synergetic Effects Between Ni and Co for Improving Low-Temperature Catalytic Performance

MnM2O4 microspheres (M = Co, Cu, Ni) for selective catalytic reduction of NO with NH3: Comparative study on catalytic activity and reaction mechanism via in-situ diffuse reflectance infrared Fourier transform spectroscopy