Abstract:The requirements for using noncyanide imitation gold plating as decorative electroplating are increasing; thus, continuously improving the quality of the coating of the imitation gold plating and optimizing the coating process have become the current priority. In this experiment, hydroxyethylidene diphosphonic acid (HEDP) was used as the main complexing agent; CuSO4·5H2O, ZnSO4·7H2O, and NaSnO3·3H2O were the main salts; and NaOH and sodium carbonate were used as the buffers to prepare the electroplating solution. Using sodium citrate (SC), sodium potassium tartrate (SS), sodium gluconate (SG), and glycerol (Gl) as four additives, the effects of the number of carboxyl groups on the properties of a Cu-Zn-Sn alloy coating were compared. The electrochemical analysis showed that Cu-Zn-Sn alloy codeposition occurred at -0.50 Vvs.Hg|HgO. The scanning electron microscopy (SEM) results showed that the grain size of the coatings obtained with carboxyl-containing additives was more uniform than that obtained with the electroplating solution without additives. The X-ray fluorescence spectrometry (XRF) analysis revealed that the composition of the Cu-Zn-Sn alloy coating obtained by using SC as an additive in the electroplating solution was 89.75 wt% Cu, 9.61 wt% Zn, and 0.64 wt% Sn, and the color of the coating was golden yellow. The X-ray diffraction (XRD) pattern showed that the coating was a mixture of Cu, Cu5Zn8, CuSn, Cu6Sn5, and CuZn phases. The analysis of the electroplating solution by UV, IR, and NMR spectroscopy methods indicates that the additives improve the coating by affecting the complexation reaction of metal ions. These results can provide technical guidance for developing Cu-Zn-Sn ternary alloy electrodeposition technology with the new cyanide-free HEDP alkaline electroplating system.

A Composite Additive Used for an Excellent New Cyanide-Free Silver Plating Bath

Complexing Agent Study Via Computational Chemistry for Environmentally Friendly Silver Electrodeposition and the Application of a Silver Deposit

DMH and NA–based Cyanide-Free Silver Electroplating Bath: a Promising Alternative to Cyanide Ones in Microelectronics

Environmental Friendly Silver Brush-Plating Technique and Its Application

Synthesis and the Improved High-Rate Performance of Limn2o4/Ag Composite Cathode for Lithium-Ion Batteries

Study on Lead-and Cadmium-Free Composite Additive for Electroless Nickel Plating

Cyanide-free copper electroplating in sulfite/thiosulfate bath

A Combined Theoretical and Experimental Study for Silver Electroplating

Complexing Agent Study for Environmentally Friendly Silver Electrodeposition(Ii): Electrochemical Behavior of Silver Complex

Electrodeposition of Mirror-Bright Silver in Cyanide-Free Bath Containing Uracil As Complexing Agent Without A Separate Strike Plating Process

Cyanide-free Silver Immersion Deposition Involving 3-Mercapto-1-propanesulfonic Acid for Copper Finishing

Electrodeposition Mechanism and Process of a Novel Cyanide-Free Gold Sulfite Bath

Study of complexing agents for cyanide-free alkaline copper plating on steel substrate

Development of a Novel Silver Ions-Nanosilver Complementary Composite As Antimicrobial Additive for Powder Coating

Preparation of Ag-Al2O3 nano-composites powder

Effects of Additive on the Electrodeposition and Coating Structure in a Novel System of Electronic Copper Electroplating

A comprehensive review of various non-cyanide electroplating baths for the production of silver and gold coatings

Theoretical and experimental studies on the electrodeposited nanocrystalline Ag coatings from a novel Ag2O-based non-cyanide electrolyte

Synthesis and Evaluation of Organic Additives for Copper Electroplating of Interconnects

Synthesis and Electrochemical Properties of a Copper Plating Additive

Effects of four carboxyl-containing additives on imitation gold electroplating Cu-Zn-Sn alloys in an HEDP system