Abstract:This study demonstrates that adding exfoliated graphene nanoplatelets (XGNPs) and few‐layer graphene (FLG) significantly enhances the electrical and thermal properties of high‐density polyethylene (HDPE), with FLG showing a tenfold increase in conductivity compared to XGNPs. Despite the wide range of applications of polyethylene (PE), many efforts are being made to improve its properties with carbon allotropes such as graphene. The addition of graphene can improve the electrical, thermal, and mechanical properties of this polymer. Through the present study, the effects of exfoliated graphene nanoplatelets (XGNPs) and few‐layer graphene (FLG) on the electrical conductivity and thermal properties of high‐density polyethylene (HDPE) were investigated. XGNPs were synthesized by ultrasonication of graphite nanoplatelets, and FLG was synthesized by shear exfoliation of flake graphite. Finally, HDPE powder particles were coated with dispersed XGNPs and FLG. Then XGNPs/HDPE nanocomposites and FLG/HDPE nanocomposites were fabricated by compression molding. The morphology, structural, electrical, and thermal properties of the graphite, graphene, PE, and nanocomposites were observed and comparatively studied by transmission electron microscopy, field emission scanning electron microscope, x‐ray diffraction (XRD), Raman spectroscopy, and conductivity measurements. The graphene's D, G, and 2D bands were revealed by Raman spectroscopy of nanocomposites and verified the existence of the graphene in the polymer matrix. XRD revealed that the graphene did not affect the original crystalline structure of the HDPE matrix, and the Fourier‐transform infrared spectroscopy revealed that the nanocomposite was obtained without the formation of any functional groups. The electrical properties of the nanocomposites were comparatively studied. After adding XGNPs (7 wt%), volumetric electrical conductivity in a sample reached from 10−16 to 10−3 S/m. The highest volumetric conductivity, 1.1 × 10−2 S/m, that is, semiconductor‐like conductivity, was achieved after adding 7 wt% of FLG. The glass transition temperatures (Tg), melting temperatures (Tm), and thermal stability were investigated by differential scanning calorimetry and TGA, respectively, and it was concluded that Tg and Tm increase by adding the graphene. This study shows that shear exfoliation of graphene is the best and the most facile method to prepare mass‐scale graphene for the production of graphene/polyolefin nanocomposites. Highlights Two types of graphene were produced by using sonication and shear‐exfoliation. HDPE powders were coated with two types of graphene and then hot pressed. The method of (G) preparation is crucialparameter on electrical conductivity. In the sample containing 7 wt% (XGNPs), the highest conductivity is 10−3 S/m. In the sample containing 7 wt% (FLG), the highest conductivity is 10−2 S/m.

Thermal, Electrical and Rheological Behavior of High-Density Polyethylene/graphite Composites

Thermal conductivity of high density polyethylene filled with graphite

High Thermal Conductivity Of Flake Graphite Reinforced Polyethylene Composites Fabricated By The Powder Mixing Method And The Melt-Extruding Process

Hdpe/Expanded Graphite Electrically Conducting Composite

Mechanical and rheological properties of HDPE/graphite composite with enhanced thermal conductivity

Graphene Enhanced Electrical Properties of Polyethylene Blends for High-Voltage Insulation

Effect of HDPE-g-MAH on Properties of HDPE/Graphite Thermal Conductive Composites

Breaking graphite through a ball-milling process: the thermal conductivity and mechanical properties of polyethylene composites

Preparation of Low-Density Polyethylene/low-Temperature Expandable Graphite Composites with High Thermal Conductivity by an in Situ Expansion Melt Blending Process

Largely Improved Thermal Conductivity of HDPE/expanded Graphite/carbon Nanotubes Ternary Composites Via Filler Network-Network Synergy

Rheological Properties and Percolation of High-Density Polyethylene Filled with Graphites Having Different Topological Parameters

Electrically Conductive Properties of Ultra-high Molecular Weight Polyethylene/Graphene Nanoplatelets Composites

Temperature-dependence of dynamic rheological properties for high-density polyethylene filled with graphite

Preparation and Characterization of PE-UHMW/Graphene Nanoplatelets Conductive Composites

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

Thermally expanded graphite polyetherimide composite with superior electrical and thermal conductivity

HDPE/expanded Graphite Nanocomposites Prepared Via Masterbatch Process

Significant Enhancement of Thermal Conductivity in Graphite/polyester Composite Via Interfacial Π–π Interaction

Influence of exfoliation method of graphene on physical properties of graphene/High Density Polyethylene nanocomposites: Semiconductor‐like electrical conductivity, glass transition, and melting temperature

Study on the Properties of HDPE/Graphite/Carbon Fiber Thermal Conductivity Composite

Preparation and Characterization of High‐density Polyethylene/expanded Graphite Conducting Masterbatch