Abstract:Polymer-based thermal conductive composites (PTCs) with both excellent thermal and mechanical properties are highly desirable in the thermal management of modern microelectronic industry. However, the enhancement efficiency for fillers loaded polymer composite is actually lower than the theoretically predicted value. The significant reasons could be due to the restriction of interfacial thermal resistance at filler-polymer matrix interfaces as well as the thermal conductive orientation dependence of anisotropic fillers. In the present study, solid-state shear milling (S3M) strategy and FDM 3D-printing aligning technology were combined to synergistically improve thermal conductivity of linear low-density polyethylene (LLDPE)/graphene nanoplatelet (GNPs) nanocomposites. The fabricated FDM 3D-printed parts exhibit a significantly enhanced through-plane thermal conductivity up to 3.43 W m−1 K−1 along printing direction compared to that of neat LLDPE (0.40 W m−1 K−1) and also that of traditionally melt-compounded LLDPE/GNPs composites (1.98 W m−1 K−1) at the same GNPs loading of 15.0 vol%. The enhanced thermal conductivity is attributed to the long-range aligned bridge-connected network structure of GNPs constructed in the PE matrix along printing direction due to the shear-inducing effect of FDM 3D-printing. Simultaneously, the S3M technology we adopted also reduces the interfacial thermal resistance and thus increases the thermal conductivity of the obtained nanocomposite, which was further demonstrated by the way of theoretical effective medium approximation (EMA) models we applied. The achieved high thermal conductivity and mechanical properties of the FDM 3D-printed LLDPE/GNPs thermal conductive parts suggest promising applications in the heat diffusion of some advanced electronic devices.

Preparation and Characterization of PE-UHMW/Graphene Nanoplatelets Conductive Composites

Electrically Conductive Properties of Ultra-high Molecular Weight Polyethylene/Graphene Nanoplatelets Composites

Electrical Properties of Graphene Nanosheets/Ultra-High Molecular Weight Polyethylene Composites

Preparing CNT/UHMWPE Composite and It’s Electrical Property Study

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Temperature-Resistivity Characteristics of A Segregated Conductive Cb/Pp/Uhmwpe Composite

Positive Temperature Coefficient and Electrical Conductivity Investigation of Hybrid Nanocomposites Based on High‐Density Polyethylene/Graphene Nanoplatelets/Carbon Black

Preparation and PTC properties of multilayer graphene/CB/HDPE conductive composites with different cross-linking systems

Study on Preparation and Properties of Ultrahigh Molecular Weight Polyethylene Composites Filled with Different Carbon Materials

Positive temperature coefficient characteristic and structure of graphite nanofibers reinforced high density polyethylene/carbon black nanocomposites

Effect of graphene nanoplatelets relative size and polyethylene chain length on the enhancement of thermal conductivity of their composite

Graphene Nanoplatelets or Polylactic Acid Conductive Polymer Composites: Tensile, Thermal and Electrical Properties

Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods

Processable 3-nm thick graphene platelets of high electrical conductivity and their epoxy composites.

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

Electrical, thermal, and mechanical properties of polyarylene ether nitriles/graphite nanosheets nanocomposites prepared by masterbatch route

Electrostatic adsorption method for preparing electrically conducting ultrahigh molecular weight polyethylene/graphene nanosheets composites with a segregated network

Preparation of Antistatic High‐density Polyethylene Composites Based on Synergistic Effect of Graphene Nanoplatelets and Multi‐walled Carbon Nanotubes

Breaking graphite through a ball-milling process: the thermal conductivity and mechanical properties of polyethylene composites

Highly electrically conductive polyether composites with modified graphene

Hydrophilic Cu-Graphene Heterostructure Fillers for the Enhancement of the Thermal Performance of Poly(vinyl Alcohol)-Based Composites