Abstract:Publication date: 31 July 2023 Source: Key Engineering Materials Vol. 950 Author(s): Amalia Rohmah Fajariah, Euis Siti Nurazizah, Ferry Faizal, Lusi Safriani Recently, dye sensitized solar cell (DSSC) are considered to replace the previous generation of solar cells. DSSC uses an organic dye to absorb light and convert it to electricity. One-dimensional morphological structure of photoanode that provides a straight pathway for electron transport can improve the efficiency of DSSC. TiO2 nanofibers is one-dimensional structure of oxide semiconductor material commonly used as photoanode in DSSC. A simple method to synthesis continuous nanofiber is electrospinning method that use the influence of electrostatic forces. The nanofiber's diameter that produced by electrospinning method depends on several parameters, one of which is the applied voltage. This study reports the synthesis of TiO2 nanofibers with varying the applied voltages from 10 kV to 14 kV and their performance as photoanode in DSSC. TiO2 nanofibers were electrospun directly onto a TiO2-coated fluorine tin oxide (FTO) substrate from a mixture of titanium (IV) propoxide (TTIP), triton X-100, acetic acid, poly (vinyl) acetate (PVAc) that were dissolved in dimethyl formamide (DMF). TiO2 nanofiber photoanodes were then immersed in ruthenium (II) dye, stacked with a counter electrode, and finally the electrolyte was injected between them. Based on the SEM results, we found that the beads disappeared with increasing applied voltage. The XRD pattern of TiO2 nanofibers indicates the presence of the anatase phase. Based on the photocurrent-voltage characteristic, TiO2 nanofibers produced by applied voltage of 14 kV shows the highest efficiency of 1.11% with JSC 4.78 mA/cm2, VOC 0.74 Volt and fill factor (FF) of 31.37%.

Efficient Natural Dye-Sensitized Solar Cells Based on Spin-Coated Tio2 Anode Materials

High Efficiency Dye-Sensitized Solar Cells Based on Natural Dyes

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Efficient Natural Dye-Sensitized Solar Cells Based on TiO 2 Nanorod Arrays

Enhancement of Natural Dye-Sensitized Solar Cell Efficiency Through TiO2 Hombikat UV100 and TiO2 P25 Photoanode Optimization

Nanoengineering TiO2 for evaluating performance in dye sensitized solar cells with natural dyes

A dye-sensitized solar cell based on natural photosensitizers and a PEDOT:PSS/TiO2 film as a counter electrode

Performance of Natural Dye Extracted from Annatto, Black Plum, Turmeric, Red Spinach, and Cactus as Photosensitizers in TiO2NP/TiNT Composites for Solar Cell Applications

Energy Band Tunable TixSn1−xO2 Photoanode for Efficient Non-Tio2 Type Dye Sensitized Solar Cells

TiO2-Ag AND NATURAL DYE CO-PIGMENTED WITH SALICYLIC ACID FOR DYE-SENSITIZED SOLAR CELL (DSSC) APPLICATION

Synthesis of anatase TiO2 microspheres and their efficient performance in dye-sensitized solar cell

Synthesis of TiO2 Nanofiber as Photoanode of Dye Sensitized Solar Cells (DSSC)

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

Natural dye-sensitive solar cells (N-DSSCs) are fabricated using TiO2/1 wt% SrTiO3 as photoanodes

Low-Cost Fabrication of TiO2 Nanorod Photoelectrode for Dye-sensitized Solar Cell Application

Sn-Doped TiO2 Photoanode for Dye-Sensitized Solar Cells

Solar-To-Electric Performance Enhancement by Titanium Oxide Nanoparticles Coated with Porous Yttrium Oxide for Dye-Sensitized Solar Cells

Dye-Sensitized Solar Cells Based on Porous Hollow Tin Oxide Nanofibers

Organic Dye-Sensitized Sponge-Like TiO 2 Photoanode for Dye-Sensitized Solar Cells

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells