Abstract:The amino substituted 1,4-naphthoquinone photosensitizers, viz; BrA5; 2-bromo-3-(pentylamino)naphthalene-1,4-dione, BrA6; 2-bromo-3-(hexylamino)naphthalene-1,4-dione, BrA7; 2-bromo-3-(heptylamino)naphthalene-1,4-dione, BrA8; 2-bromo-3-(octylamino)naphthalene-1,4-dione, have been synthesized from 2,3-dibromonaphthalene-1,4-dione. These photosensitizers were employed for the first time in TiO 2 NG-based dye-sensitized solar cells (DSSCs). The TiO 2 nanograin (TiO 2 NG) compact layer was prepared using chemical bath deposition to reduce the electron recombination. The porous layer of TiO 2 NG was deposited using the doctor blade method, followed by calcination at 450 °C. After sensitization of BrA5, BrA6, BrA7, and BrA8 photosensitizers on the TiO 2 NG photoelectrodes, the optical properties of photoelectrodes show the broad band each in the visible region, which is assigned to n → π* charge-transfer transition. FT-IR analysis of photosensitizers showed the existence of N–H bands. The XRD pattern of TiO 2 NG photoanode confirmed the anatase and rutile phase. The E 0-0 and HOMO–LUMO energy levels were calculated using UV–visible, fluorescence spectroscopy, and cyclic voltammetry, respectively. The E 0-0 of BrA5 and BrA7 is 2.35 eV, while that of BrA6 and BrA8 is 2.33 eV. The DSSCs system is fabricated by loading the BrA5, BrA6, BrA7, and BrA8 photosensitizers on TiO 2 NGs. The photosensitizer's photovoltaic performances of TiO 2 NG-based electrodes were studied through electrochemical impedance analysis. The J–V curve analysis and characterization show that the efficient light absorption and reduction of charge recombination at the TiO 2 NG photoanodes are the main reasons for the efficiency of the TiO 2 NG/BrA5, TiO 2 NG/BrA6, TiO 2 NG/BrA7, and TiO 2 NG/BrA8 photoelectrodes. Compared to DSSCs employing other photosensitizers (BrA5, BrA6, and BrA7) on a TiO 2 NG photoelectrode (TiO 2 NG/BrA5 (0.33%), TiO 2 NG/BrA6 (0.35%), TiO 2 NG/BrA7 (0.36%), those using BrA8 demonstrate higher power conversion efficiencies. Specifically, TiO 2 NG/BrA8 shows the highest efficiency at 0.43%. The enhanced performance of the TiO 2 NG/BrA8-based DSSC can be attributed to its increased dye loading and rapid electron injection. The present study will open a new route to fabricate highly efficient DSSCs using amino-substituted 1,4-naphthoquinone photosensitizers.

Natural dye-sensitive solar cells (N-DSSCs) are fabricated using TiO2/1 wt% SrTiO3 as photoanodes

Fabrication and performance analysis of set standard natural dye-sensitized solar cell (N-DSSC) using extracted Terminalia kattapa (Red), Azadirachia indica (Green), and Clitoria ternatea (Blue) dyes with virgin Degussa p25 photo-anode

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Performance of Natural Dye Extracted from Annatto, Black Plum, Turmeric, Red Spinach, and Cactus as Photosensitizers in TiO2NP/TiNT Composites for Solar Cell Applications

Fabrication of an efficient amino substituted 1,4-naphthoquinones sensitized TiO2 nanograin based dye sensitized solar cells

Nanoengineering TiO2 for evaluating performance in dye sensitized solar cells with natural dyes

Improved the DSSCs performance by sensitizing eight natural dyes and varying the annealing process on the TiO2

Natural dyes extracted from Inthanin bok leaves as light-harvesting units for dye-sensitized solar cells

DSSC using natural dye sensitized and Ag/CdS/TiO 2 composite structured light anode

Enhancement of Natural Dye-Sensitized Solar Cell Efficiency Through TiO2 Hombikat UV100 and TiO2 P25 Photoanode Optimization

Exploring the potential of natural dyes in DSSCs: Innovations for efficient light harvesting and charge separation through Co-sensitization

Natural Dye-Sensitized Solar Cells: Fabrication, Characterization, and Challenges

Efficient Organic-Dye-Sensitized Nanocrystalline Tio2 Solar Cells

Synergetic impact of natural light harvesting materials to reduce the recombination rate and improve the device performance of dye sensitized solar cells

Natural sensitizer extracted from Mussaenda erythrophylla for dye-sensitized solar cell

TiO2-Ag AND NATURAL DYE CO-PIGMENTED WITH SALICYLIC ACID FOR DYE-SENSITIZED SOLAR CELL (DSSC) APPLICATION

Highly Efficient DSSCs Sensitized Using NIR Responsive Bacteriopheophytine-a and Its Derivatives Extracted from Rhodobacter Sphaeroides Photobacteria

Evaluation of Solar Conversion Efficiency in Dye-sensitized Solar Cells Using Natural Dyes Extracted from Alpinia purpurata and Alstroemeria Flower Petals as Novel Photosensitizers

A Green Approach to Natural Dyes in Dye-Sensitized Solar Cells

Advances on Dye-Sensitized Solar Cells (DSSCs) Nanostructures and Natural Colorants: A Review