Abstract:The tribochemical reaction of polytetrafluoroethylene (PTFE) resin sliding against a metallic surface was investigated for a purpose of improving its tribological performance. The tribochemical reaction between PTFE and aluminum surface has been investigated experimentally and theoretically [ Onodera et al., J. Phys. Chem. C 2015, 119, 15954−15962 ]. One of the important results is that the wear and self-lubrication properties can be controlled by the catalytic activity of the oxidized aluminum surfaces with different crystal structures (α- and γ-alumina). In particular, the amount of wear was higher on the γ-alumina surface because it easily activates tribochemical degradation of PTFE and suppresses the formation of transfer film (a necessary phenomenon for reducing wear). Accordingly, for controlling catalytic activity a copper surface was tested as a model surface exhibiting a weaker reactivity than an aluminum surface. A thermogravimetric analysis proved that the copper surface showed a weaker catalytic effect in regard to PTFE degradation in comparison with an aluminum surface. Metallic fluoride, causing less transfer film to form, appeared on the aluminum surface but hardly any was observed on the copper surface. An experiment and density functional theory (DFT) calculations showed lower catalytic activity on copper surfaces. A friction test was also carried out to determine the relationship between the catalytic activity of metallic surfaces on PTFE and the resultant wear properties. A rubbed copper surface was fully covered with flakelike PTFE transfer film, and no metallic fluoride was detected. Transfer film was less abundant on an aluminum surface because aluminum fluoride tribochemically formed. Reflecting these chemical changes, the wear amount of PTFE on the copper surface was less than that on the aluminum surface. The results of this investigation indicate that suppressing the catalytic effect during friction process of PTFE is a promising way to improve its tribological performance. The use of a copper-based material will be effective in industrial uses of PTFE, because it suppresses catalytic tribochemical degradation.

Tribochemical Reactions and Lubricating Effects of Fluorinated Methanes for Al 2 O 3 Ceramic

Tribological Characteristics and Tribochemical Reactions of Various Ceramics Lubricated with HFC-134a Gas

Friction–wear behavior and tribochemical reactions of different ceramics in HFC-134a gas

The Role of Products of Tribochemical Reactions on the Friction and Wear Properties of Alumina/silicon Carbide Couple Sliding in HFC-134a Gas

Effect of gas pressure on tribological properties and tribochemical reactions of alumina sliding against zirconia in HFC-134a

Effects of Sliding Speed on Tribological Behaviors and Tribochemical Reactions of Alumina in HFC-134a Gas

Chemisorption and Tribochemical Reaction Mechanisms of HFC-134a on Nascent Ceramic Surfaces

Fluorine-Doped Amorphous Carbon-Coated Magnesium Silicate Hydroxide as Lubricant Additive and Atomic Simulation

Surface Engineering Design of Al2O3/Mo Self-Lubricating Structural Ceramics - Part II: Continuous Lubrication Effects of a Three-Dimensional Lubricating Layer at Temperatures from 25 to 800 °C

Surface 3-D Lubrication Structure Design of Al2O3/Ni-laminated Ceramics to Improve Tribological Properties under Combined Environments

Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithic Ceramic to Achieve Excellent Lubrication in a High Vacuum Environment

Unraveling Tribochemistry and Self-Lubrication Mechanism of Polytetrafluoroethylene by Reactive Coarse-Grained Molecular Dynamics Simulations.

Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithic Ceramic to Achieve Continuous Lubrication from Room Temperature to 800 °C

Alkyloxy-s-triazine Derivatives with and Without Fluorine-Containing Substituents As Lubricants for Steel–steel Contact

Effect Of Surface Roughness And Wear In Lubricated Of Self-Mated Alumina On Friction Reciprocating Sliding Contact

Microstructure and tribological properties of ZrO2(Y2O3) matrix composites doped with different solid lubricants from room temperature to 800°C

The effect of tribofilm formation on the tribological characteristics of ceramic-cast iron sliding pairs

Surface Composition-Lubrication Design of Al2O3/Mo Laminated Composites—part I: Influence of Laser Surface Texturing on the Tribological Behavior at 25 and 800 °C

Tribochemical Degradation of Polytetrafluoroethylene Catalyzed by Copper and Aluminum Surfaces

How Polytetrafluoroethylene Lubricates Iron: An Atomistic View by Reactive Molecular Dynamics