Abstract:Bimetallic CoCu model catalysts were investigated for the synthesis of higher alcohols using catalytic CO hydrogenation according to the Fischer–Tropsch technology. Emphasis was placed on revealing the influence of the activation conditions. Accordingly, catalyst precursors were activated in argon, hydrogen, syngas (CO/H2), and CO under atmospheric conditions and at elevated temperatures (370 °C). All catalyst precursors were prepared via oxalate coprecipitation in the absence of a classic support. Alcohol selectivities between 30 and ∼40% (up to ∼50% for the sum of alcohols and alkenes) were obtained with an Anderson–Schulz–Flory (ASF) chain lengthening probability maximizing the slate up to C6. Detailed catalysis and characterization studies were performed using a Co2Cu1 catalyst composition. The catalytic performances of the H2- and syngas-activated Co2Cu1 catalyst were similar. While the CO-activated catalyst shows significantly higher catalytic activity and ASF chain lengthening probability, the alcohol selectivities are lower than those of H2- or syngas-activated ones. All catalysts required time on stream for several hours to achieve steady-state catalytic performance. Co2Cu1 catalysts were characterized by temperature-programmed decomposition (TPDec), in situ N2 physisorption (Brunauer–Emmett–Teller), transmission electron microscopy (TEM), and in situ X-ray photoelectron spectroscopy (XPS). The data indicate major restructuring occurs during activation. An “onion-like” graphitic carbon shell was observed via TEM for the CO-activated Co2Cu1 catalyst, which probably originated mainly from the Boudouard reaction (2CO + [ ]ad → Cad + CO2). This interpretation is in accordance with the TPDec profiles and XPS results. The latter also indicates that syngas and CO activation lead to higher than nominal Co/Cu surface ratios. The surface segregation of Co in the presence of CO atmospheres is interpreted on the basis of Co@Cu core–shell structured particles.

Structure and Catalytic Performance of Alumina-Supported Copper–cobalt Catalysts for Carbon Monoxide Hydrogenation

Influence of the Support and Promotion on the Structure and Catalytic Performance of Copper-Cobalt Catalysts for Carbon Monoxide Hydrogenation

Theoretical Investigation on the CO2 Hydrogenation to Methanol Mechanism at Electron-Rich Active Interface over Cu/Ga-Ti-Al-O Catalyst

Copper–cobalt catalysts supported on mechanically mixed HZSM-5 and γ-Al2O3 for higher alcohols synthesis via carbon monoxide hydrogenation

In Situ FTIR and Ex Situ XPS/HS-LEIS Study of Supported Cu/Al2O3 and Cu/ZnO Catalysts for CO2 Hydrogenation

Effect of copper source on the structure–activity of CuAl2O4 spinel catalysts for CO hydrogenation

Sheet-Like Morphology CuO/Co3O4 Nanocomposites for Enhanced Catalysis in Hydrogenation of CO2 to Methanol

Structural evolution of bimetallic Co-Cu catalysts in CO hydrogenation to higher alcohols at high pressure

Cobalt species in promoted cobalt alumina-supported Fischer–Tropsch catalysts

The Effect of Copper Addition on the Activity and Stability of Iron-Based CO2 Hydrogenation Catalysts

Elucidating the Copper–Hägg Iron Carbide Synergistic Interactions for Selective CO Hydrogenation to Higher Alcohols

Effect of cobalt promoter on Co–Mo–K/C catalysts used for mixed alcohol synthesis

CO Oxidation over Alumina-Supported Copper Catalysts

Higher Alcohols through CO Hydrogenation over CoCu Catalysts: Influence of Precursor Activation

Elucidating the Structure-Activity Relationship of the Bimetallic Ni-Cu Catalysts for CO2 Hydrogenation

Effects of Manganese on the Catalytic Performance of CuCo Catalysts for Direct Conversion of CO/CO2 to Higher Alcohol

Elucidating the structure-activity relationship of the bimetallic Ni-Cu catalysts for CO 2 hydrogenation

Cobalt and Copper Composite Oxides as Efficient Catalysts for Preferential Oxidation of CO in H 2 -Rich Stream

Effect of the promoter and support on cobalt-based catalysts for higher alcohols synthesis through CO hydrogenation