Abstract:This research explores the intricacies of oxygen exchange kinetics in Pr4Ni3O10+δ (PNO), aiming to assess its potential as a viable cathode material for solid oxide fuel cell applications. Utilizing a multifaceted approach, advanced techniques such as electrical conductivity relaxation, pulse isotopic exchange, and oxygen permeation are employed. A comparative analysis with other promising cathode materials, specifically La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF6428), reveals PNO superior performance. At 650 °C, PNO demonstrates an order of magnitude higher chemical diffusion exchange coefficient, Dchem, than LSCF6428, and its surface exchange coefficient, kchem, surpasses LSCF6428 by one and a half orders of magnitude. Long-term stability assessment through 1000 h electrical conductivity relaxation testing at 700 °C confirms PNO consistent performance. Oxygen permeation studies reveal an inverse correlation between membrane thickness and permeation rate. Notably, PNO demonstrates an impressive two-fold higher oxygen flux compared to LSCF6428. Furthermore, PNO maintains stable oxygen permeation over 1000 h at 700 °C, contrasting with an observed 11% degradation in LSCF6428. X-ray diffraction and scanning electron microscopy analyses corroborate PNO stability, while secondary phase formation observed in LSCF6428 contributes to its degradation. The pulse isotopic exchange measurements conducted on the fractionated powder of PNO within the temperature range of 350-450 °C provide valuable insights into the surface exchange mechanism. These measurements reveal that at highest oxygen partial pressure (pO2) values covered by the experiments, the relative rates of dissociative adsorption, Rads, and oxygen incorporation, Rinc, engage in competitive oxygen exchange dynamics. Conversely, at the lower pO2 values, oxygen exchange is predominantly limited by Rads.

The Phase Stability of the Ruddlesden-Popper Type Oxide (pr0.9la0.1)2.0ni0.74cu0.21ga0.05o4+ in an Oxidizing Environment

A new CO2-resistant Ruddlesden–Popper oxide with superior oxygen transport: A-site deficient (Pr0.9La0.1)1.9(Ni0.74Cu0.21Ga0.05)O4+δ

Toward Understanding Structural Stability in Cu-Substituted (pr1–xndx)2nio4+δ by in Situ and Operando Studies

Oxygen Permeation Through a CO2‐tolerant Mixed Conducting Oxide (Pr0.9la0.1)2(ni0.74cu0.21ga0.05)o4+δ

Electrochemical properties of La1.5Pr0.5Ni0.95−Cu Al0.05O4+ Ruddlesden-Popper phase as cathodes for intermediate-temperature solid oxide fuel cells

Enhanced oxygen exchange kinetics and long-term stability of Ruddlesden-Popper phase Pr4Ni3O10+δ cathode for solid oxide fuel cells

Insight Into An Unusual Lanthanum Effect On The Oxygen Reduction Reaction Activity Of Ruddlesden-Popper-Type Cation-Nonstoichiometric La2-Xnio4+Delta (X=0-0.1) Oxides

Pr1.8La0.2Ni0.74Cu0.21Ga 0.05O4+δ as a potential cathode material with CO2 resistance for intermediate temperature solid oxide fuel cell

A Ruddlesden–Popper Oxide As a Carbon Dioxide Tolerant Cathode for Solid Oxide Fuel Cells That Operate at Intermediate Temperatures

(Pr0.9la0.1)2(ni0.74cu0.21ga0.05)o4+δ As Cathode Material for CeO2-based Intermediate-Temperature Solid-Oxide Fuel Cell

Neutron diffraction and DFT studies of oxygen defect and transport in higher-order Ruddlesden–Popper phase materials

Role of Pr-Vacancies and O-Interstitials on the Activity and Stability of (Pr<sub>1−x</sub>Ln<sub>x</sub>)<sub>2</sub>NiO<sub>4</sub> (Ln = La, Nd, Pm, Sm, Gd, Tb, Dy, and Ho) towards Oxygen Reduction Reactions: A DFT Study

Preparation and Electrochemical Properties of La1.5Pr0.5NiO4 and La1.5Pr0.5Ni0.9Cu0.1O4 Cathode Materials for Intermediate-Temperature Solid Oxide Fuel Cells

Role of Pr-Vacancies and O-Interstitials on the Activity and Stability of (Pr1-Xlnx)2nio4 (ln = La, Nd, Pm, Sm, Gd, Tb, Dy, and Ho) Towards Oxygen Reduction Reactions: A DFT Study

Oxygen Point Defect Chemistry in Ruddlesden-Popper Oxides (La$_{1-x}$Sr$_{x}$)$_{2}$MO$_{4{\pm}δ}$ (M = Co, Ni, Cu)

A-site double-lanthanide-doped La1−xPrxBaCo2O5+δ cathode materials for intermediate-temperature solid oxide fuel cells

CO2-tolerant and cobalt-free La4Ni3-xCuxO10±δ (x = 0, 0.3, 0.5 and 0.7) cathodes for intermediate-temperature solid oxide fuel cells

Various Influence of Surface Modification on Permeability and Phase Stability Through an Oxygen Permeable Membrane

High-Temperature Oxygen Release from Complex Oxide La2NiO4 + δ in Quasi-Equilibrium Mode

New mechanistic insight into the oxygen reduction reaction on Ruddlesden–Popper cathodes for intermediate-temperature solid oxide fuel cells

High-entropy approach to double perovskite cathode materials for solid oxide fuel cells: Is multicomponent occupancy in (La,Pr,Nd,Sm,Gd)BaCo2O5+δ affecting physicochemical and electrocatalytic properties?