Abstract:In order to improve the hydrophobicity of traditional polyethersulfone (PES) membranes, this study combined the reverse thermally induced phase separation (RTIPS) method with the constructed bimetallic polyphenol networks (BMPNs) to prepare hydrophilic anti-fouling membranes. As for BMPNs, tannic acid (TA) was served as an intermediate to construct both the inner and surface hydrophilic layers of the PES membranes. On the one hand, etching Zeolitic imidazolate framework-8 (EZIF-8) with synergistic etching and surface functionalization via TA not only retained the high pore structure of MOFs, but also had good hydrophilicity. On the other hand, the MPN hydrophilic layer was formed on the membrane surface by the combination of TA from the surface of EZIF-8 and iron ions in the coagulation bath. Therefore, BMPNs structure penetrated the interior and surface of PES membrane, which greatly improved the hydrophilic properties. In addition, the membrane with porous surfaces and spongy cross sections by RTIPS method improved the permeability and mechanical properties of the membrane by several times compared with the membrane via NIPS method. The obtained membranes in this experiment showed excellent permeability, just like pure water flux reached 1662.16 L/m2 h, while BSA rejection rate remained at 92.78%. Compared with pure membrane, it showed a better flux recovery rate (FRR = 83.33%) after cleaning, and the reduction of irreversible (Rir = 16.67%) fouling indexes indicated that the adsorption of protein was inhibited. These results suggested that the hydrophilic anti-fouling PES membranes prepared by this method possessed great application potential in membrane separation technology.

Ionic-strength-sensitive Polyethersulfone Membrane with Improved Anti-Fouling Property Modified by Zwitterionic Polymer Via in Situ Cross-Linked Polymerization

Engineering of hemocompatible and antifouling polyethersulfone membranes by blending with heparin-mimicking microgels

Antifouling and blood‐compatible poly(ether sulfone) membranes modified by zwitterionic copolymers via In situ crosslinked copolymerization

Zwitterionic Glycosyl Modified Polyethersulfone Membranes with Enhanced Anti-Fouling Property and Blood Compatibility

A Robust Way to Prepare Blood-Compatible and Anti-Fouling Polyethersulfone Membrane

Zwitterionic Polymer Functionalization of Polysulfone Membrane with Improved Antifouling Property and Blood Compatibility by Combination of ATRP and Click Chemistry.

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Modification of a Polyethersulfone Membrane with a Block Copolymer Brush of Poly(2-Methacryloyloxyethyl Phosphorylcholine-Co-glycidyl Methacrylate) and a Branched Polypeptide Chain of Arg-Glu-Asp-Val

Improved Antifouling Property of Polyethersulfone Hollow Fiber Membranes Using Additive of Poly(Ethylene Glycol) Methyl Ether-B-Poly(Styrene) Copolymers

A Polyethersulfone–bisphenol Sulfuric Acid Hollow Fiber Ultrafiltration Membrane Fabricated by a Reverse Thermally Induced Phase Separation Process

Improved Blood Compatibility of Polyethersulfone Membrane with A Hydrophilic and Anionic Surface

Antifouling Ultrafiltration Membrane Composed of Polyethersulfone and Sulfobetaine Copolymer

A Facile Approach Toward Multifunctional Polyethersulfone Membranes Via in Situ Cross-Linked Copolymerization.

Surface Engineering of Low-Fouling and Hemocompatible Polyethersulfone Membranes Via In-Situ Ring-Opening Reaction

Surface Modification of Poly(ether Sulfone) Membrane with a Synthesized Negatively Charged Copolymer.

Improved Antifouling Properties of Poly(Ether Sulfone) Membrane by Incorporating the Amphiphilic Comb Copolymer with Mixed Poly(Ethylene Glycol) and Poly(Dimethylsiloxane) Brushes

Versatile Antifouling Polyethersulfone Filtration Membranes Modified Via Surface Grafting of Zwitterionic Polymers from a Reactive Amphiphilic Copolymer Additive.

Enhancing the Antifouling and Antimicrobial Properties of Poly(ether sulfone) Membranes by Surface Quaternization from a Reactive Poly(ether sulfone) Based Copolymer Additive

Bimetallic polyphenol networks structure modified polyethersulfone membrane with hydrophilic and anti-fouling properties based on reverse thermally induced phase separation method

High Efficient Protocol for the Modification of Polyethersulfone Membranes with Anticoagulant and Antifouling Properties Via in Situ Cross-Linked Copolymerization

Zwitterionic copolymer modified polyethersulphone/sulfonated polysulphone membranes for enhancing dye/salt selective separation