Abstract:In microfiltration processes for drinking water treatment, one method of removing trace contaminants is to add powdered activated carbon (PAC). Recently, a version of PAC called superfine PAC (S-PAC) has been under development. S-PAC has a smaller particle size and thus faster adsorption kinetics than conventionally sized PAC. Membrane coating performance of various S-PAC samples was evaluated by measuring adsorption of atrazine, a model micropollutant. S-PACs were created in-house from PACs of three different materials: coal, wood, and coconut shell. Milling time was varied to produce S-PACs pulverized with different amounts of energy. These had different particles sizes, but other properties (e.g. oxygen content), also differed. In pure water the coal based S-PACs showed superior atrazine adsorption; all milled carbons had over 90% removal while the PAC had only 45% removal. With addition of calcium and/or NOM, removal rates decreased, but milled carbons still removed more atrazine than PAC. Oxygen content and specific external surface area (both of which increased with longer milling times) were the most significant predictors of atrazine removal. S-PAC coatings resulted in loss of filtration flux compared to an uncoated membrane and smaller particles caused more flux decline than larger particles; however, the data suggest that NOM fouling is still more of a concern than S-PAC fouling. The addition of calcium improved the flux, especially for the longer-milled carbons. Overall the data show that when milling S-PAC with different levels of energy there is a tradeoff: smaller particles adsorb contaminants better, but cause greater flux decline. Fortunately, an acceptable balance may be possible; for example, in these experiments the coal-based S-PAC after 30 min of milling achieved a fairly high atrazine removal (overall 80%) with a fairly low flux reduction (under 30%) even in the presence of NOM. This suggests that relatively short duration (low energy) milling is viable for creating useful S-PAC materials applied in tandem with microfiltration.

Powder Activated Carbon Pretreatment Of A Microfiltration Membrane For The Treatment Of Surface Water

Effect of Powdered Activated Carbon on Immersed Hollow Fiber Ultrafiltration Membrane Fouling Caused by Particles and Natural Organic Matter

TREATMENT OF MICRO-POLLUTED WATER RESOURCES BY POWDERED ACTIVATED CARBON-ULTRAFILTRATION MEMBRANE PROCESS

PAC-UF Process Improving Surface Water Treatment: PAC Effects and Membrane Fouling Mechanism

Effect of Peroxymonosulfate Oxidation Activated by Powdered Activated Carbon for Mitigating Ultrafiltration Membrane Fouling Caused by Different Natural Organic Matter Fractions.

The role of PAC adsorption-catalytic oxidation in the ultrafiltration performance for treating natural water: Efficiency improvement, fouling mitigation and mechanisms

[Pollution Removal Efficiency of Powdered Activated Carbon and Microfiltration Integrated Process].

Assessing Pre-Adsorption Time Impact on Ultrafiltration Performance for Surface Water Treatment

Evaluation of PAC Effect in Integrated PAC/UF System for Surface Water Treatment

Enhanced Pretreatment of Powdered Activated Carbon/Sludge Recycle Process Before Membrane Treatment

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

Influence of powdered activated carbon on the membrane filtration performance

Preparation and Performance of PAC Modified PVDF Ultrafiltration Membrane

Control of Natural Organic Matter Fouling of Ultrafiltration Membrane by Adsorption Pretreatment: Comparison of Mesoporous Adsorbent Resin and Powdered Activated Carbon

Performance of mesoporous adsorbent resin and powdered activated carbon in mitigating ultrafiltration membrane fouling caused by algal extracellular organic matter

Effect of PAC addition on immersed ultrafiltration for the treatment of algal-rich water.

Superfine powdered activated carbon (S-PAC) coatings on microfiltration membranes: Effects of milling time on contaminant removal and flux

Pretreatment to Enhance Flux of Ultrafiltration

Effects of Combined Ozone and PAC Pretreatment on Ultrafiltration Membrane Fouling Control and Mechanisms

Organic matter removal and membrane fouling mitigation during algae-rich surface water treatment by powdered activated carbon adsorption pretreatment: Enhanced by UV and UV/chlorine oxidation.

Investigation of Pre-Coagulation and Powder Activate Carbon Adsorption on Ultrafiltration Membrane Fouling