Abstract:6-8 wt% yttria-stabilized zirconia (YSZ) has been widely employed as thermal barrier coating (TBC) to protect the high-temperature components of aero-engine and gas-turbine. However, the phase transition and sintering densification at high temperature seriously limit its application above 1200 °C. On account of this, CeO2 and Sc2O3 were doped into the YSZ by solid-state reaction sintering method in this paper. The effects of doping on the crystal structure, phase transition behavior and sintering resistance were investigated on the basis of XRD, Raman and FESEM, and the evolution of thermal properties of the ceramics was also analyzed. The results indicated that doped CeO2 increases the cell volume and tetragonal degree, but doped Sc2O3 was opposite. Co-doping caused not only significant difference in atomic mass and radius but also the formation of a large number of oxygen vacancies in the ceramics. Therefore, CeScYSZ showed the lowest thermal conductivity (1.53 W‧m−1‧K−1), which was about 23% lower than that of YSZ (2.00 W‧m−1‧K−1). More importantly, the oxygen vacancy also effectively stabilized the octet lattice, while the increase of lattice energy caused by Sc-O bond made it difficult for ions to misplace, which finally well prevented the transformation from t phase to m phase. There was no detrimental m-ZrO2 phase formation in the CeScYSZ after 120 h at 1500 °C. Besides, Co-doping could simultaneously overcome the poor sintering resistance caused by single CeO2 doping and the lower thermal expansion coefficient caused by single Sc2O3 doping, thus the CeScYSZ should be an ideal long-acting thermal protection material at higher temperatures.

Microstructure and Thermal Properties of Nanostructured 8 Wt.% Ceo2 Doped Ysz Coatings Prepared by Atmospheric Plasma Spraying

Characterization of Ceria–yttria Stabilized Zirconia Plasma-Sprayed Coatings

Effect of doping CeO2 and Sc2O3 on structure, thermal properties and sintering resistance of YSZ

Study on Thermal Shock Resistance of Nano-CeO2–Y2O3 Co-Stabilized ZrO2 (CYSZ) Ceramic Powders Thermal Barrier Coating of Aircraft Engine

Thermal Cycling Behavior of Nanostructured 8YSZ, SZ/8YSZ and 8CSZ/8YSZ Thermal Barrier Coatings Fabricated by Atmospheric Plasma Spraying

EBSD analysis of microstructure changes in YSZ coatings during thermal cycling

Microstructural and Mechanical Property Evolutions of Plasma-Sprayed YSZ Coating During High-Temperature Exposure: Comparison Study Between 8YSZ and 20YSZ

RELATION BETWEEN MICROSTRUCTURE AND THERMAL CONDUCTIVITY OF PLASMA-SPRAYED 8YSZ COATING

Influence of Microstructure on Thermal Conductivity of Plasma-Sprayed YSZ Coating

Bonding Strength and Thermal Conductivity of Novel Nanostructured La2(Zr0.75Ce0.25)2O7/8YSZ Coatings

Microstructural and columnar growth characteristics of 7YSZ thermal barrier coatings fabricated by plasma spray physical vapor deposition

Microstructure and Deposition Mechanism of Suspension Plasma Spraying Thermal Barrier Coatings

Fabrication and Characterization of CeO2-Doped Yttria-Stabilized ZrO2 Composite Particles

Thermal Stability of Plasma-Sprayed La2Ce2O7/YSZ Composite Coating

Characterization of Multi-Scale Synergistic Toughened Nanostructured YSZ Thermal Barrier Coatings: from Feedstocks to Coatings

Thermal Cycling Behavior of Nanostructured and Conventional Yttria-Stabilized Zirconia Thermal Barrier Coatings Via Air Plasma Spray

Effect of powder structure on microstructure and electrical properties of plasma-sprayed 4.5mol% YSZ coating

Reactive deposition of CYSZ coatings using PS-PVD technology

Effect of CeO2 doping on high temperature oxidation resistance of YSZ TBCs

Build-up of the Splat with Columnar Nanocrystalline for Thermal Barrier Coatings Derived from Nanostructured T-8Ysz Feedstocks

Nanomechanical properties of plasma-sprayed nanostructured and conventional 8YSZ thermal barrier coatings