Abstract:The graphical shows the synergistic effect of SWCNT/GO hybrid filler in enhancing mechanical and thermal stabilization property of PAN. The presence of polar functional groups of GO improved dispersion efficiency of SWCNT which resulted in high tensile strength. While presence of GO caused early oxidation which improved thermal stability and carbon yield of PAN. This study reports how hybrid nano‐filler can enhance the tensile strength, electrical properties and thermal stabilization of PAN (polyacrylonitrile) nanocomposite films. The nano‐fillers used are graphene oxide (GO), single‐wall carbon nanotubes (SWCNT), and a hybrid of both. The combination of both nano‐fillers was made by dispersing GO in DMAc (dimethyl acetamide) and then adding SWCNT to the solution. The solution was mixed well using ultrasonication and high‐speed stirring. 1 wt% amount of nano‐filler solutions was added to PAN liquid to make PAN nanocomposite films. The films were tested for mechanical properties, electrical resistivity, thermoxidative stabilization, and thermal stability. The results showed that adding nano‐fillers to PAN significantly improved its tensile strength. GO increased the tensile strength by 42.9% (38.3 MPa), while SWCNT increased it by 57.3% (42.15 MPa). The combination of both (0.5 wt% SWCNT + 0.5 wt% GO) had a remarkable effect, increasing the tensile strength by 96% (52.53 MPa). This was because the combination of both prevented SWCNT from agglomerating together and made it interact better with the PAN, forming a complete network. The combination of both also made the PAN oxidize and stabilize early and efficiently during heating, which made its residual weight increase by ~5.5% more than pristine PAN in TGA. The electrical resistivity and SEM micrograph data correlate with the thermal analysis data, showing that PCG (1 wt% combination) reached the percolation threshold because of the benefits of both GO and SWCNT. The combination of both also showed 95.6% synergy in tensile strength compared to individual nano‐fillers, indicating its potential for efficient reinforcement. Highlights Hybrid filler boosts PAN strength from 26.8 to 52.53 MPa, surpassing PC, PG. TGA: ~5.5 wt% increased residual weight in 1 wt% hybrid‐reinforced PCG composites. Hybrid undergoes GO decomposition, early oxidation and improved stabilization. PCG composite: Enhanced oxidation, improved stabilization via SWCNT network. PC & PCG composites show low volumetric resistivity due to SWCNT network.

Radiation preparation of graphene/carbon nanotubes hybrid fillers for mechanical reinforcement of poly(vinyl alcohol) films

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Simultaneously improving the mechanical and electrical properties of poly(vinyl alcohol) composites by high-quality graphitic nanoribbons.

Molecular‐Level Dispersion of Graphene into Poly(vinyl Alcohol) and Effective Reinforcement of Their Nanocomposites

New Processing Method to Fabricate High-Performance Carbon-Nanotube/Polyvinyl Alcohol Composite Films

PPTA-oligomer Functionalized Multiwalled Carbon Nanotubes Synthesized by "One-Pot" Method for Reinforcement of Polyvinyl Chloride

High performance carbon nanotube based composite film from layer-by-layer deposition

Poly(vinyl alcohol)/graphene nanoplatelet nanocomposites: Elucidation of the nanofiller, dispersing agent, and interphase effects on thermomechanical properties

Effect of Length of Cellulose Nanofibers on Mechanical Reinforcement of Polyvinyl Alcohol

Improved electromagnetic interference shielding properties of poly (vinylidene fluoride) composites based on carbon nanotubes and graphene nanoplatelets

Fabrication and properties of clay-supported carbon nanotube/poly (vinyl alcohol) nanocomposites

Functionalization of unzipped carbon nanotube via in situ polymerization for mechanical reinforcement of polymer

Synergistic Effect of Hybrid Montmorillonite-Reduced Graphene Oxide As Dual Filler for Improving the Mechanical Properties of Pva Composites by A One-Step Procedure

Swelling and Mechanical Behaviors of Carbon Nanotube/poly(vinyl Alcohol) Hybrid Hydrogels

Integration of PDA Chemistry and Surface‐Initiated ATRP to Prepare Poly(methyl Methacrylate)‐grafted Carbon Nanotubes and Its Effect on Poly(vinylidene Fluoride)–carbon Nanotube Composite Properties

Enhancement in mechanical properties of polyamide 66-carbon fiber composites containing graphene oxide-carbon nanotube hybrid nanofillers synthesized through in situ interfacial polymerization

Construction of Carbon Nanotubes/bismaleimide Composite Films with Superior Tensile Strength and Toughness

Producing Superior Composites by Winding Carbon Nanotubes Onto A Mandrel under A Poly(Vinyl Alcohol) Spray

Synergistic effect of single wall carbon nanotubes/graphene oxide hybrid nano‐filler on thermal stabilization and tensile strength of polyacrylonitrile copolymer

Strengthening Carbon Nanotube Fibers with Semi-Crystallized Polyvinyl Alcohol and Hot-Stretching