Abstract:NR/BR/SBR rubber composites with different CB/RR filler ratios and their mechanical and thermal properties before and after thermo‐oxidative and radiation aging. This work aims to find the optimal ratio of recycled rubber (RR) in carbon black (CB)/RR filler and determine its influence on the mechanical properties, thermal behavior, and activation energy of ternary rubber based on polyisoprene (natural rubber [NR]), polybutadiene (butadiene rubber [BR]), and styrene–butadiene rubber (SBR) with a constant ratio of 40/40/20 parts per 100 of rubber (phr). The filler used was N330 (60 phr) and a mixture of CB/RR filler in the following proportions: 55/5, 50/10, and 40/20 phr. The activation energy of the examined samples was determined by the rheometric method. The samples were subjected to thermo‐oxidative (at 100°C after 168 h) and γ‐radiation aging (200 kGy). Hardness, tensile strength, and elongation at break were evaluated before and after thermo‐oxidative and γ‐radiation aging. SEM, attenuated total reflectance fourier‐transform infrared (ATR‐FTIR), and TG/DTG techniques were used to characterize NR/BR/SBR composites. The results show that the most optimal CB/RR ratio is 55/5 phr, which is confirmed by the mechanical properties before and after aging and the results for the activation energies of cross‐linking and reversion. The thermal stability of the composite containing 60 phr of the CB and the composite reinforced with 5 phr of the RR in CB/RR filler is almost the same. The results of this research may be applicable in the automotive tire industry since NR/BR/SBR composites are used for automotive tire treads. Another benefit of this research is that the partial replacement of CB with RR contributes to the reduction of tire waste, and thus to the preservation of environmental protection. Highlights Rubber composite NR/BR/SBR = 40/40/20 phr reinforced with CB/RR filler The amount of RR in the CB/RR filler has been changed to 5, 10 and 20 phr The lowest value for Eac has the sample containing filler CB/RR = 55/5 phr The most thermally stable sample is the sample with 5 phr RR in CB/RR filler RR (5 phr) can be applied in CB/RR filler to reinforce NR/BR/SBR composites

The network and properties of the NR/SBR vulcanizate modified by electron beam irradiation

Improved Dynamic Properties of Natural Rubber Filled with Irradiation-Modified Carbon Black

MONTMORILLONITE REINFORCED SBR AND EFFECT ON THE VULCANIZATION OF RUBBER

Evaluation of the improved properties of SBR/weathered coal modified bitumen containing carbon black

Electron beam radiation crosslinking of natural rubber filled with silica–graphene blend prepared by latex mixing: dynamic mechanical analysis, volume resistivity, and degradation

Effect of Modified Carbon Black on the Filler–elastomer Interaction and Dynamic Mechanical Properties of SBR Vulcanizates

Effects of Carbon Black Surface Modification on the Morphology and Properties in Blends with Natural Rubber Studied with High‐Resolution X‐Ray Computed Tomography

Enhanced abrasion resistance of NR/BR/TBIR composites through the synergistic reinforcement of carbon black and graphene oxide: Structural influence and mechanistic insights

Effects of Electron Beam Irradiation on the Mechanical, Thermal, and Surface Properties of Some EPDM/Butyl Rubber Composites

Mechanical Properties, Radiation Resistance Performances, and Mechanism Insights of Nitrile Butadiene Rubber Irradiated with High-Dose Gamma Rays

Insight on the properties of thermoplastic elastomer-based natural rubber and recycled rubber post-treated with electron beam irradiation

Influence of BN doped 2‐hydroxyethyl methacrylate phosphate coated expandable graphite on flame retardancy and thermal conductivity of styrene‐butadiene rubber composites

Mo Dification of NBR Surface by Low Energy and High Current Ion Implantation

Use of recycled rubber in carbon black as a filler in ternary blends of NR/BR/SBR for the automotive tire industry

Utilization of agro waste activated carbons as carbon black replacement in electron beam irradiated styrene butadiene rubber composites

Radiation preparation of ultrafine carboxylated styrene-butadiene rubber powders and application for nylon 6 as an impact modifier

Reinforced rubber with ionic liquid modified carbon black

Effect of Grafted Carbon Black on Properties of Vulcanized Natural Rubber

Radiation preparation of nano-powdered styrene-butadiene rubber (SBR) and its toughening effect for polystyrene and high-impact polystyrene

Effect of thermally exfoliated graphite on the performance characteristics of epoxidized natural rubber compatibilized natural rubber/polybutadiene tyre tread formulations

Structure and Properties of Carbon Black Filled Powdered NR Used as Tread Compound of Truck Radial Tire