Abstract:It is desirable but challenging for ruthenium (Ru)-based chalcogenides to achieve high activity and good durability toward oxygen reduction reaction (ORR) in fuel cell applications. In this work, a facile microwave route followed by heat treatment was utilized to synthesize carbon supported ruthenium tellurium (RuTe 2 /C) catalysts, and the effects of heat treatment temperature on crystal structure, microstructure, chemical state, electrocatalytic activity, and fuel cell performance were studied. The mixed phase of predominant orthorhombic RuTe 2 and minor hexagonal Ru was identified as dual active sites for RuTe 2 /C catalysts. Density functional theory calculations demonstrated that orthorhombic RuTe 2 exhibits enhanced intrinsic activity relative to pure Ru due to the weakened absorption energies of oxygen intermediates. Because of the smallest nanoparticle size and complete formation of an orthorhombic RuTe 2 structure, the best ORR performance was achieved with the RuTe 2 /C catalyst heat treated at 400°C, showing a maximum half-wave potential of 0.70 V and only a 70 mV drop (10.0% loss) after 6000 potential cycles. In a H 2 /O 2 fuel cell test, the best-performed RuTe 2 /C catalyst delivered a maximum power density of 672 mW⋅cm −2 using a low cathode Ru loading of 0.18 mg·cm −2 , which is the best performance ever achieved for the Ru-based catalysts. After 6000 cycles of rigorous accelerated degradation test, the cell performance decayed by 55.4% because of the migrations of Te and Ru from the cathode side to the anode side and the growth of the RuTe 2 /C nanoparticles.

The Electrocatalytic Application of RuO2 in Direct Borohydride Fuel Cells

A Novel CuFe-based Catalyst for the Oxygen Reduction Reaction in Alkaline Media

Engineering Energy Level of Metal Center: Ru Single-Atom Site for Efficient and Durable Oxygen Reduction Catalysis.

Development of the Cathode Catalyst for Direct Borohydride Fuel Cell

FeS As a Promising Cathode Catalyst for Direct Borohydride Fuel Cells

Development of High-Performance Cathode Catalyst of Polypyrrole Modified Carbon Supported CoOOH for Direct Borohydride Fuel Cell

Performance enhancement for direct borohydride fuel cells through ternary Ru–Co–B oxide catalyst

Vacancy-assisted Oxygen Reduction Reaction on Cobalt-Based Catalysts in Direct Borohydride Fuel Cell Revealed by In-Situ XAFS and XRD

High Electrocatalytic Activity for Borohydride Oxidation on Palladium Nanocubes Enclosed by {200} Facets

LaNi0.9Ru0.1O3 As a Cathode Catalyst for a Direct Borohydride Fuel Cell

In Situ Study of the Catalytic Mechanism for the Oxygen Reduction Reaction on a Polypyrrole Modified Carbon Supported Cobalt Hydroxide Cathode in Direct Borohydride Fuel Cells.

Electrocatalysts for the Anodic Oxidation of Borohydrides

Highly Efficient RuTe 2 /C Electrocatalyst for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells

Sulfur Dioxide-Tolerant Bimetallic PtRu Catalyst Toward Oxygen Electroreduction

Boosting borohydride oxidation kinetics by manipulating hydrogen evolution and oxidation through octahedral Pt–Ni/C for high-performance direct borohydride fuel cells

A Highly‐Efficient Boron Interstitially Inserted Ru Anode Catalyst for Anion Exchange Membrane Fuel Cells

In Situ Growth of Ru/RuO2 Nanoparticle-Modified (prba)0.95mn1.9ru0.1o5+δ As a High-Performance Electrode for Symmetrical Solid Oxide Fuel Cells

Hollow Pt‐Encrusted RuCu Nanocages Optimizing OH Adsorption for Efficient Hydrogen Oxidation Electrocatalysis

Motivating Ru-bri site of RuO2 by boron doping toward high performance acidic and neutral oxygen evolution

Low Ruthenium Content Confined on Boron Carbon Nitride as an Efficient and Stable Electrocatalyst for Acidic Oxygen Evolution Reaction.

Study of CoO as an anode catalyst for a membraneless direct borohydride fuel cell